JVC DR-MV1 Instructions Manual page 79

RECORDING SET
8 SAVE AS LIBRARY — OFF / ON
When this function is set to "ON", the recording information is
automatically stored in the library. For details, refer to "Modify
Library Information" (
8 XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a programme in
XP mode. When this function is set to "LINEAR PCM", you can
obtain a high-quality audio sound.
DOLBY DIGITAL
: To record in Dolby Digital format.
LINEAR PCM
: To record in Linear PCM format.
8 AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM 1/MAIN
: To record the main language of NICAM audio.
NICAM 2/SUB
: To record the sub language of NICAM audio.
MONO
: To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8 DIRECT REC — OFF / ON
When this function is set to "ON", you can easily start recording the
programme that you are watching on your TV. Press and hold 7
and press 4 on the remote control, or press 7 on the unit.
NOTES:
● When you use the Direct Rec function, be sure to use a TV offering
T-V LINK, etc. and connect a fully-wired 21-pin SCART cable
between the unit and the TV. (
● If "DIRECT REC" is set to "OFF", the 7 button functions as described
in "Basic Recording" (
● During Direct Rec, "– –" appears on the front display panel.
● If a programme is recorded with the Direct Rec, the station name will
not be registered in the library. "– – – –" will be displayed for the
station name.
● Even if there is no power supply for more than 60 minutes, the unit
keeps the setting.
8 INPUT COLOUR SYSTEM — PAL / SECAM
You can play back PAL discs, or record PAL and SECAM signals on
this unit. Select the appropriate colour system.
PAL
: To record PAL signals.
SECAM
: To record SECAM signals.
DISPLAY SET
8 SUPERIMPOSE — OFF / AUTO
When this function is set to "AUTO", various operational indicators
appear on the TV screen. Messages appear in the selected
language. ( pg. 20)
OFF
: To turn off superimposed indications.
AUTO
: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
● Even when "SUPERIMPOSE" is set to "OFF", you can display the
various operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.
● When you use this unit as the source player for editing, be sure to set
"SUPERIMPOSE" to "OFF" before starting. (
● When you select "AUTO", during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
Downloaded From DvDPlayer-Manual.com JVC Manuals
pg. 63).
pg. 16)
pg. 40).
pg. 79)
8 GRAY BACK — OFF / ON
When this function is set to "ON", the TV screen becomes all grey
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to "OFF".
8 DIMMER — BRIGHT / DIM
You can change the brightness of the front display panel.
BRIGHT
: Normally select this.
DIM
: To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8 POWER SAVE — OFF / ON
When this function is set to "ON", you can reduce the power
consumption while the unit is turned off.
NOTES:
● During Power Save mode —
— the front display panel will be turned off.
— the Just Clock function ( pg. 85) does not work.
● Power Save does not work when —
— the unit is in the Timer mode.
— the unit's power is turned off after timer-recording or Instant Timer
Recording.
— the Automatic Satellite Programme Recording mode is engaged.
( pg. 48)
— "L-2 SELECT" is set to "DECODER", "SAT VIDEO" or "SAT S-VIDEO".
( pg. 72)
● It takes some time for the unit to complete initialisation after you turn
on unit power, with "WAKE UP" blinking on the front display panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 10
different languages. Though Auto Set Up selects the language
automatically ( pg. 19), you can change the language setting
manually as required.
For details, refer to "On-screen Language Set" (
OTHERS
8 RESUME — ON / OFF / DISC RESUME
When this function is set to "ON" or "DISC RESUME", you can use
the resume function. ( pg. 26)
ON
: You can start playback from the resume point of the placed
disc.
OFF
: You cannot use the resume function.
DISC RESUME
: The unit retains a memory of the resume points of
the last 30 discs played back, even though they have been
ejected.
NOTE:
"DISC RESUME" setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other types
of discs, the function under "ON" setting will be applied even if
"RESUME" is set to "DISC RESUME".
8 AUTO TIMER — OFF / ON
When this function is set to "ON", the timer is automatically
engaged when the unit power is turned off, and automatically
disengaged when the unit is powered back on.
NOTE:
For safety, when "AUTO TIMER" is set to "OFF", all other functions are
disabled while the Timer mode is engaged. To disengage the timer,
press DVD TIMER (#).
SUBSIDIARY SETTINGS
79
EN
pg. 20).