JVC DR-MV1 Instructions Manual page 9

DVD VIDEO Marks
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc may
not include a mark even for a function it supports.
Marks related to video
Number of subtitles
Recorded under the
standard 4:3 aspect
ratio
Video playback is in Wide video mode (16:9) on
wide televisions, but in letter box on televisions
with standard 4:3 aspect ratio.
Video playback is in Wide video mode (16:9) on
wide televisions, but pan and scan is used on
televisions with standard 4:3 aspect ratio (either
the left or right side of the image is cut-out).
Marks related to audio
Number of audio tracks
Dolby Digital mark
It has been developed by Dolby Laboratories as a
digital surround system.
DTS (Digital Theater Systems)
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL AUDIO OUT connector of the unit.
Downloaded From DvDPlayer-Manual.com JVC Manuals
Placing A Disc
Opening the disc tray
Press x to open the disc tray.
Number of angles
● Pressing the button again closes the disc tray.
Screen includes black
● Use the buttons to open and close the disc tray.
bands at the top and
● Do not block the disc tray with your hand while it is opening or closing
the bottom of image
● Do not place unplayable discs or any object other than a disc on the
which has a standard
4:3 aspect ratio (letter
● Do not press down strongly on the disc tray or place any heavy
box)
Discs without cartridges
Place the disc on the disc tray with the
label side facing up. Since disc size
changes depending on the disc to be
played back, be sure to correctly align
the disc with the grooves for its size. If
the disc is not in its groove, it may be
scratched or otherwise damaged. To
insert an 8 cm disc, place it according
to the inner groove.
DVD-RAM discs contained in
cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with "Side A" facing down, programmes are recorded on the side A.
Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.
as this may result in hardware failure.
disc tray.
objects on it.
DISC INFORMATION
9
EN
x
DVD
DUB
VCR
-OPE N
DVD PULL
DV IN
LINK
REC
CH
FF
E REW DVD
PAUS
REC
REM AIN
>>
<< SLOW
MODE
REC