Section 1 Specifications - Icom IC-FR3000 Service Manual

SECTION 1 SPECIFICATIONS

Measurement method
Frequency range
Type of emission
Channel spacing
Frequency stability
Number of channels
Antenna connector
Power supply requirement
Current drain (approx.)
Operating temperature range
Dimensions (proj. not included)
Weight (approx.)
RF output power (High/Low)
Modulation system
Maximum frequency deviation
Spurious emissions
Adjacent channel power
Input impedance
Receive system
Intermediate frequencies
Sensitivity (typical)
Adjacent channel selectivity (typical)
Spurious response
Intermodulation (typical)
Audio output power
Audio output impedance
All stated specifications are subject to change without notice or obligation.
IC-FR3000
EIA / TIA-603
[USA2], [GEN2], [GEN4], [GEN74], [EUR2], [FRG2]: 150.000–174.000 MHz
[GEN74]:
[USA2], [GEN2], [GEN4], [GEN74], [EUR2]: 25/12.5 kHz
[FRG2]:
±2.5 ppm
[USA2], [GEN2]:
AC
[GEN4], [GEN74], [EUR2], [FRG2]:
DC 13.6 V DC (negative ground)
TX
TX (at 50 W) 15.0 A
RX
–30˚C to +60˚C (–22˚F to +140˚F)
410(W) × 110(H) × 360(D) mm; 16.1 (W)
50/10 W
Variable reactance frequency modulation
[Wide]: ±5.0 kHz, [Middle]: ±4.0 kHz, [Narrow]: ±2.5 kHz
70 dBc typical
[Wide], [Middle]: 70 dB, [Narrow]: 60 dB
Double-conversion superheterodyne system
0.5 µV at 12 dB SINAD
[Wide], [Middle]: 70 dB, [Narrow]: 60 dB
2.5 W typical at 10% distortion with a 4 Ω load
Wide (25 kHz): 16K0F3E
Middle (20 kHz): 14K0F3E
Narrow (12.5 kHz): 8K50F3E
20/12.5 kHz
Max. 32 channel
2 (50 Ω)
×
Type-N
100–120 V
220–240 V
13.2 V DC (negative ground)
TX (at 25 W) 10.0 A
RX (max. audio) 2 A
(stand-by) 1 A
–25˚C to +55˚C
× ×
4.3 (H) 14.1 (D) inch
12 kg; 26.5 lb
0.25 µW ≤ 1GHz, 1.0 µW > 1 GHz
600 Ω
1st: 31.65 MHz, 2nd: 455 kHz
6 dBµV (emf) at 20 dB SINAD
70 dB
70 dB
4 Ω
IC-FR3100
ETS 300 086
148.000–172.000 MHz
±1.0 kHz
25/5 W