Inserting the Batteries
This camera uses four AA (R6) alkaline, NiMH, lithium or NiCd batteries.
It can also take two CR-V3 lithium battery packs. Do not use zinc-carbon
(manganese) batteries.
Do not mix different types of batteries or insert the batteries facing in
the wrong direction. As it may overheat and cause irreparable damage
to the camera.
2
3
4
1
2
3
4
Using AA (R6)
alkaline batteries
Using lithium
battery packs
Make sure the power is off.
• The lens barrier must be
closed.
• Make sure the monitor is off.
Slide the battery compartment
lock from
to
Slide the battery compartment
cover to the side and lift it up
to open.
Insert the batteries as shown
in the diagram.
• When using the lithium battery
packs, insert them so the
"CAMEDIA" label on each
battery is facing the lens side
of the camera.
• Some batteries may have an
insulation seal attached.
Remove this before using the
battery.
Do not remove
the silver label.
1
.
Insulation
seal
7