Confirming Pictures Directly After Shooting (Rec View) - Olympus C-200 ZOOM Reference Manual

Confirming Pictures Directly
After Shooting
If you want to confirm your pictures on the monitor immediately after
shooting, without using the playback mode set Rec View to "ON". This
will cause the most recently taken picture to be displayed on the
monitor immediately.
The Rec View setting remains even after the camera has been turned
off.
For operating instructions see "Using the Shooting Menu" (p.72).
Image Group Menu Items:
REC VIEW
[ NAME RESET
FILE
SET
CANCEL
Settings:
REC VIEW
OFF
ON
CANCEL
(Rec View)
[ OFF ]
]
RESET
[ ]
[ ON ]
SET
OFF (default setting):
When the monitor is on, it displays
whatever subject is being seen through
the camera's lens (except directly after
taking a picture, at which time the
monitor will go black momentarily).
ON:
The monitor will display the most
SET OK
recently taken picture immediately after
it is shot. After a short time, the monitor
will resume displaying whatever subject
is being seen through the camera's
lens.
If the monitor is turned off, it will turn on
after a picture is taken, display the most
recent picture for a short time, then go
off again.
Press to highlight "REC
VIEW". The setting screen
will be displayed.
5
93