Getting.started - Project Nursery PNM402 User Manual

GETTING STARTED
Step 2: Charge the monitor
Find.one.of.the.charging.
cables.included.in.this.
package.
Plug.one.end.of.this.cable.into.
the.USB CHARGING.jack.on.
the.side.of.the.parent.monitor..
Plug.the.other.end.of.the.
charging.cable.into.one.of.the.
included.charging.adapters..
Then.plug.the.adapter.into.an.
outlet.or.surge.protector.
Step 3: Position the camera(s)
Find.a.location.for.the.
camera.that.gives.you.the.
best.view.of.your.baby.in.his.
or.her.crib.
Place.the.camera.on.a.flat.surface,.like.a.
dresser.or.shelf,.or.mount.the.camera.to.a.wall.
using.the.keyhole.slots.on.its.bottom.
IMPORTANT: NEVER.place.the.camera.or.cords.
of.any.kind.inside.the.crib..NEVER.place.the.
camera.or.cords.within.reach.of.the.baby.
WARNING
Strangulation Hazard: Children.have.
STRANGLED.in.cords..Keep.this.cord.
out.of.the.reach.of.children.(more.than.
3ft.(0.9m).away)..Never.use.extension.
cords.with.AC.Adapters..Only.use.the.AC.
Adapters.provided.
3