Project Nursery PNM402 User Manual page 25

12:00AM
Temperature
Time Set
Date: 01/01/16
Time: 12:00 AM
Factory Reset
Support
Product Information
SD Card Information
12:00AM
Temperature
Time Set
Factory Reset
Reset all settings
to default?
Support
Product Information
SD Card Information
SETTING THE TIME AND DATE
1
In.the.Settings.menu,.press.the.down.arrow.to.highlight.
Time Set..Press.OK/ZOOM.to.select.it..
2
.. Use.the.up/down.arrow.buttons.to.set.the.date...
3
.. After.setting.the.year,.press.the.right.arrow.to.adjust.the.
time..Then.use.the.up/down.arrows.to.set.the.time..Press.
OK/ZOOM.when.you're.finished.
RESETTING TO FACTORY SETTINGS
If.you've.tried.all.of.the.troubleshooting.solutions.to.solve.
a.problem,.and.nothing.seems.to.work,.you.might.need.to.
reset.the.monitor.to.its.factory.settings.and.start.setup.again..
WARNING: Resetting to factory settings erases all of your
custom settings. You will have to set up the monitor from
scratch...
GETTING SUPPORT AND TECHNICAL
INFORMATION
1
In.the.Settings.menu,.press.the.down.arrow.to.highlight.one.
of.the.support.or.technical.information.options:.Support,.
Product Information,.or.SD Card Information..Press.OK/
ZOOM.to.select.it..
2
.. Press.OK/ZOOM.to.exit.
25