Project Nursery PNM402 User Manual page 13

TIP:.You.can.also.access.pan.and.
tilt.by.pressing.and.holding.the.
OK/ZOOM.button.on.the.parent.
monitor.
3
.. Press.the.Pair.button.on.the.bottom.of.the.new.camera.
4
.. Use.the.up/down.arrows.to.select.Pair: Camera 2,.Pair:
Camera 3,.or.Pair: Camera 4..Press.OK/ZOOM.to.select.it..
5
.. If.the.monitor.screen.shows.a.green.checkmark.next.to.Pair:
Camera,.you're.all.set.to.use.the.monitor.and.the.camera!.(If.
it.shows.a.red.X,.put.the.camera.closer.to.the.monitor.and.
try.again.)
PANNING AND TILTING THE CAMERA
There.are.two.ways.of.accessing.the.remote.pan.and.tilt.
function.on.the.parent.monitor:.by.pressing.and.holding.the.OK/
ZOOM.button.or.through.the.Cameras.menu.
1
In.the.Cameras.menu,.press.the.down.arrow.to.highlight.
Pan/Tilt Camera..Press.OK/ZOOM.to.select.it.
2
Use.the.arrow.buttons.to.pan.and.tilt.the.active.camera..
Press.MENU.to.return.to.the.Cameras.menu.
13