• If the shutter speed shows in red on the LCD monitor, the image is under- or
overexposed (insufficient light). Adjust the aperture value using B or A on the
multicontroller until the shutter speed display turns white.
• Please note that camera shake becomes a factor at low shutter speeds. If the
camera shake warning
camera to a tripod before shooting.
• When using a flash in this mode, the slowest shutter speed is 1/60 second.
Aperture Setting Display
The larger the aperture value, the smaller the lens aperture.
F2.8
• For the correlation between aperture value and shutter speed, see page 67.
Downloaded From camera-usermanual.com
appears in the center of the LCD monitor, secure the
F3.2
F3.5
F4.0
F4.5
F5.0
F5.6
Shooting - Selecting Particular Effects
F6.3
F7.1
F8.0
69