Printing With The Direct Print Compatible Bubble Jet Printer (Optional); Connecting Bubble Jet Printer To The Camera - Canon PowerShot S30 User Manual

Printing with the Direct Print Compatible Bubble Jet Printer (Optional)

By connecting the Direct Print compatible Bubble Jet Printer* (optional) to the
camera, you can print images very easily directly from the camera. It can also be
used with the DPOF print settings.
* Not sold in some regions
To find out if your Bubble Jet Printer supports the direct print function,
or for general information about Bubble Jet Printers or connection
cables, please also refer to the Quick Start Guide supplied with your
Bubble Jet Printer.

Connecting Bubble Jet Printer to the Camera

Be sure to turn off the camera before connecting to Bubble Jet Printer.
• You are recommended to use a household power supply to power the camera
when it is connected to the printer. If you are using a battery pack, ensure that it is
fully charged. The printing may stop if the camera battery is discharged even if it is
not complete; therefore, early replacement of the low battery with a fully charged
one is recommended.
1
DIGITAL
Terminal
2
Slide the power/replay lever to the right
to turn on the camera.
• appears on the camera LCD monitor and the
power/mode indicator is lit green when the
printer is properly connected to the camera.
Downloaded From camera-usermanual.com
Printing with the Direct Print Compatible Bubble Jet Printer (Optional)
To Bubble
Jet Printer
Bubble Jet Printer -
digital camera
connection cable
Connect the camera and printer using
the cable.
• When you insert the cable, make sure the
"Canon" logo on the cable faces the front of
the camera (lens side).
121