Usb Operation - Axxera AXM140BT Owner's Manual

AM/FM Tuner Operation
Seek Tuning
Manual Tuning
Storing and Recalling
Station Presets

USB Operation

Connecting a USB
(sold separately)
Playing Music
Track Select
Fast Forward and
Reverse
Displaying Information
AXM140BT
Press TUNE
the next strong station.
Press and hold TUNE
appears, then press TUNE
to change radio frequency up or down one step at a time.
Press and hold to advance quickly.
Press BAND to select between FM1, FM2, FM3, AM1 and
Band
AM2 bands.
Up to 18 FM stations and 12 AM stations can be stored. To
store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
To play MP3 files from most USB mass storage devices, line
Device
up the USB connector and insert the USB device into the
unit's USB port.
When a USB device is first connected, "LOAD" will appear in
the display and playback will begin momentarily. Depending
on the number of files and folders, it may take several
seconds for the device to begin playing. If no valid MP3 files
are detected, "NO FILE" will be displayed and the last mode
will be resumed.
Press TRACK
track. Press TRACK
current track. Pressing TRACK
beginning of the previous track.
Press and hold TRACK
remote control to fast forward or reverse a track.
Pause
Press
Press
ID3 tag and file/folder information will be automatically
changed during playback. Press DISP to view the clock.
Default display will resume after five seconds.
OPERATION
nn
or TUNE
nn
ll
to skip to the beginning of the next
nn
ll
l
/ II to temporarily stop USB playback.
l
/ II again to resume playback.
ll
momentarily to seek to
ll
or TUNE until "MANUAL"
nn ll
or TUNE
to return to the beginning of the
nn
again skips to the
nn
or TRACK
momentarily
on the
7