Making A Phone Call - Axxera AXM140BT Owner's Manual

Manual Dialing
Recent Calls List
Last Number Redial
Receiving a Phone Call
Ending a Phone Call
AXM140BT
Bluetooth
• Press once. "Enter Phone Number" will be shown, then
an "_" will appear on the display.
• Using the remote control, enter the phone number using
the 0-9 buttons. Press
unit's front panel to begin dialing.
Note: Placing a phone call from your cell phone will also use
the Bluetooth function of the unit.
• Press SELECT from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the unit.
• Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or
To redial the last phone number, press
Bluetooth mode. Press
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the display
and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the unit. The incoming ring tone may not be heard if
the volume is set to a low level or mute is activated.
• Press to receive the incoming phone call.
• Press to refuse the incoming phone call.
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
If the phone call was received when listening to music in
another mode, the unit will resume the previous mode.
OPERATION
Operation
®

Making a Phone Call

on the remote control or
to dial the phone number.
again to redial the phone number.
to end a phone call.
two times from
11