Maintenance; Service Information; Specifications - Black & Decker BT1200 Instruction Manual

f Spindle travel: Movement up and down of the
spindle, which determines the maximum depth of the
hole one can bore.

MAINTENANCE

(Perform all maintenance with drill press unplugged.)
Clean after use T-slots, grooves, and dirt from belts
and pulleys. Remove chips to avoid damage to moving
parts. Wipe all spindles and sleeves free of grit to avoid
damaging the precision fit.
If operated under extremely dusty conditions, operate at
the slowest speeds to avoid rapid abrasive wear on the
moving parts and lubricate the machines more often.
Under extreme cold conditions, start at a slow speed
and allow the parts and lubricants to warm up before
increasing the speeds.
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (including brush inspection
and replacement) should be performed by authorized
service centers or other qualified service organizations,
always using identical replacement parts.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black &
Decker product needs replacement, or if it is of
no further use to you, do not dispose of it with
household waste. Make this product available for
separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical
products from the household, at municipal waste
sites or by the retailer when you purchase a new
product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned
and authorized service locations. All Black & Decker
Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool
service. For more information about our authorized
service centers and if you need technical advice, repair,
or genuine factory replacement parts, contact the Black &
Decker location nearest you, or visit us at
www.BlackandDecker-la.com

SPECIFICATIONS

Power
Voltage
Speeds
Capacity
ENGLISH • 17
BT1200
250W 250W
220V ~ 50Hz 120V ~ 60Hz
1 650/min 720/min
2 900/min 1080/min
3 1250/min 1500/min
4 1700/min 2100/min
5 2700/min 3280/min
13mm (1/2") 13mm (1/2")