Basic Operation - Rockford Fosgate punch pmx-5 Installation & Operation Manual

UPDATE - Short press the encoder button to update the firmware. Follow the
instructions on the screen when updating.
FACTORY DEFAULT
AUDIO – Short press the encoder button to access. Rotate the encoder button to
select YES/NO. Selecting YES will reset your unit back to factory default settings.
SYSTEM - Short press the encoder button to access. Rotate the encoder button to
select YES/NO. Selecting YES will reset your unit back to factory default settings.

Basic Operation

TURNING THE UNIT ON / OFF
Long press the SRC (Power) button to turn the unit ON or OFF
ADJUSTING THE VOLUME
Short press the encoder button to independently adjust the volume for a specific
zone (ZONE 1>ZONE>ALL). Rotate encoder knob left or right to desired volume
level (0-40). The current volume level will be displayed during adjustment.
ADJUSTING THE SUBWOOFER OUTPUT
Press the SUB + or SUB- buttons to adjust the output level (0-20).
ADJUSTING THE SCREEN BRIGHTNESS
Short press the SCREEN BRIGHTNESS button to adjust the brightness level.
There are two brightness levels.
SELECTING A SOURCE TO PLAY
Short press the SRC button to show the different source options (FM TUNER>AM
TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA>SiriusXM). Use the
rotary encoder or short press the SRC button to scroll through sources.
SELECTING A ZONE
Long press the encoder button to toggle between source zones (ZONE 1>ZONE 2)
Tuner Operation (FM/AM/WB)
To operate, use the rotary encoder to select the tuner source you want to listen to
(FM>AM>WB).
To AUTO SEEK stations, short press the FWD and REV buttons. To MANUAL
SEEK stations, long press the FWD and REV buttons to tune to the desired
frequency.
To MUTE the TUNER, short press the PLAY/PAUSE button.
FM BAND SETTINGS
To access the FM BAND SETTINGS, short press the MENU when using the FM
TUNER source. This will give you access to the settings specific to the FM TUNER
(FM>PRESETS>ADD PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).
PRESETS
Short press the encoder button to access the PRESETS list. Using this feature
allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option. You will need to be
on both the station and PRESET group you want to add first (FM1>FM2>FM3).
Using this feature allows you to save stations to the unit. Once selected, use the
rotary encoder to select the PRESET number (1-6) you want the station saved to.
REMOVE PRESETS
Short press the encoder button on the REMOVE PRESETS option. You will need
to be under the PRESET group you want to adjust first (FM1>FM2>FM3). Using
this feature allows you to remove saved stations on the unit. Once selected, use
the rotary encoder to select the PRESET number (1-6) of the station you want
removed.
FM
Short press the encoder button to access the FM PRESET options
(FM1>FM2>FM3). Using this feature allows you to have separate tuner preset
groups to choose from. Use the rotary encoder button to scroll through the
TUNER groups and short press to select the group.
AUTO STORE
Short press the encoder button to access the AUTO STORE function. You will
need to be under the PRESET group you want to adjust first (FM1>FM2>FM3).
This feature automatically stores presets on the unit. It will stop when presets 1-6
are set. Select the next PRESET group and repeat to fill next set.
LOCAL
Short press the encoder button to access the LOCAL options. Once selected,
use the rotary encoder to select ON or OFF. The local option tunes to nearby
radio stations with sufficiently strong signals for good reception. In areas where
reception is poor, switching to distance tuning enables the unit to tune in to more
distant stations. Distance tuning is the default.
AM BAND SETTINGS
To access the AM BAND SETTINGS, short press the MENU when using the AM
TUNER source. This will give you access to the settings specific to the AM TUNER
(AM>PRESETS>ADD PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).
PRESETS
Short press the encoder button to access the PRESETS list. Using this feature
allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option. You will need to be
on both the station and PRESET group you want to add first (AM1>AM2). Using
this feature allows you to save stations to the unit. Once selected, use the rotary
encoder to select the PRESET number (1-6) you want the station saved to.
REMOVE PRESETS
Short press the encoder button on the REMOVE PRESETS option. You will need
to be under the PRESET group you want to adjust first (AM1>AM2). Using this
feature allows you to remove saved stations on the unit. Once selected, use
the rotary encoder to select the PRESET number (1-6) of the station you want
removed.
AM
Short press the encoder button to access the FM PRESET options (AM1>AM2).
Using this feature allows you to have separate tuner preset groups to choose
from. Use the rotary encoder button to scroll through the TUNER groups and short
press to select the group.
AUTO STORE
Short press the encoder button to access the AUTO STORE function. You will
need to be under the PRESET group you want to adjust first (AM1>AM2). This
feature automatically stores presets on the unit. It will stop when presets 1-6 are
set. Select the next PRESET group and repeat to fill next set.
Operation
7