Direct Tuning; Parental Controls - Rockford Fosgate punch pmx-5 Installation & Operation Manual

Operation
®
SiriusXM
®
Only SiriusXM brings you more of what you love to listen to, all in one place.
Get over 140 channels, including commerical-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the world of satellite radio. A
SiriusXM Connect Tuner and Subscription are required. For more information,
visit www.siriusxm.com
ACTIVATING YOUR SiriusXM SUBSCRIPTION
After installing your SiriusXM Connect Tuner and antenna, power on your source
unit and select SiriusXM mode. You should be able to hear the SiriusXM Preview
channel on Channel 1. If you cannot hear the preview channels, please check the
installation instructions to make sure your SiriusXM Connect tuner is properly
installed.
After you can hear the Preview channel, tune to Channel 0 to find the Radio ID
of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM
Connect Tuner and its packaging. You will need this number to activate your
subscription. Write the number down for reference.
Note: the SiriusXM Radio ID does not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:
• Visit www.siriusxm.com/activate now
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call XM Customer Care at 1-877-438-9677
As part of the activation process, the SiriusXM satellites will send an activa-
tion message to your tuner. When your radio detects that the tuner has received
the activation message, your radio will display: "Subscription Updated". Once
subscribed, you can tune to channels in your subscription plan. Note, the activa-
tion process usually takes 10 to 15 minutes, but may take up to an hour. Your
radio will need to be powered on and receiving the SiriusXM signal to receive the
activation message.
SETTINGS
To access the SiriusXM SETTINGS, short press the MENU when using the
SiriusXM source. This will give you access to the settings specific to SiriusXM
(SXM>PRESETS>ADD PRESETS>REMOVE PRESETS>CHANNELS>CATEGORY).
SiriusXM PRESET BANDS (SXM)
Short press the encoder button to access the SiriusXM PRESET options
(SXM1>SXM2>SXM3). Using this feature allows you to have separate satellite
preset groups to choose from. Use the FWD and REV buttons to scroll through the
TUNER groups.
10
PRESETS
Short press the encoder button to access the PRESETS list. Using this feature
allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option. You will
need to be on both the channel and PRESET group you want to add first
(SXM1>SXM2>SXM3). Using this feature allows you to save channels to the unit.
Once selected, use the rotary encoder to select the PRESET number (1-6) you
want the channel saved to.
REMOVE PRESETS
Short press the encoder button on the REMOVE PRESETS option. You will need
to be under the PRESET group you want to adjust first (SXM1>SXM2>SXM3).
Using this feature allows you to remove saved channels on the unit. Once
selected, use the rotary encoder to select the PRESET number (1-6) of the channel
you want removed.
CHANNEL
Short press the encoder button on the CHANNEL option to select this feature. This
feature displays a complete listing of channels.
CATEGORY
Short press the encoder button on the CATEGORY option to select this feature.
This feature allows you to search channels based on their CATEGORY type.

DIRECT TUNING

Short press the encoder button on the DIRECT TUNING option to select this fea-
ture. This feature allows you to directly tune to a channel if you already know the
channel number. Rotate the encoder until you reach the desired number and press
to enter your selection. Repeat until the channel number is completed.

PARENTAL CONTROLS

Short press the encoder button on the PARENTAL CONTROL option to select
this feature. This feature allows you to easily lock and unlock channels with
mature content. To turn this feature on, short press the encoder on PARENTAL
CONTROLS to select. You will be asked to enter a code to activate it. Enter "1111"
for your code. Once the code is entered correctly, this will give you access to the
PARENTAL CONTROL features (LOCK CHANNELS>CHANGE MY CODE). Use the
encoder knob to scroll through the options and short press to select.
LOCK CHANNELS
Short press the encoder button on the LOCK CHANNELS option to select this
feature. This feature allows you to select certain channels to be locked out for
listening. When trying to listen to locked channels, you will need to enter the
correct access code to listen to them. Use the rotary encoder to input code.
CHANGE MY CODE
Short press the encoder button on the CHANGE MY CODE option to reset the
PARENTAL CONTROL access code. Use the rotary encoder to input the code.