Olympus SP-610UZ Instruction Manual page 52

To play back camera images on a TV To play back camera images on a TV
●
Connection via AV cable
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).
2 Connect the TV and camera.
Open the connector cover
in the direction of the arrow.
●
Connection via HDMI cable
1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).
2 Connect the TV and camera.
When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input
setting of the TV, the signal format is changed fi rst to 720p and then to 480p/576p. For details on changing the input
setting of the TV, refer to the TV's instruction manual.
When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera.
Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.
Open the connector cover
in the direction of the arrow.
52 EN
For information on using the menus, see "Setup menu" (p. 6).
Multi-connector
AV cable (supplied)
HDMI micro
connector
HDMI cable (type D/sold separately: CB-HD1)
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Connect to the HDMI
connector on the TV.