Q Power On - Olympus SP-610UZ Instruction Manual

Selecting a method for connecting Selecting a method for connecting
the camera to other devices the camera to other devices
[USB Connection] [USB Connection]
r (Settings 1) USB Connection
Submenu 2
When the camera is connected to
Auto another device, the settings selection
screen is displayed.
Select when connecting the camera
Storage
to a computer via a storage device.
Select when transferring images
without using the supplied ib (PC
MTP
software) on Windows Vista/
Windows 7.
Select when connecting to a
Print
PictBridge-compatible printer.
System requirements System requirements
Windows : Windows XP (Service Pack 1 or
later)/Windows Vista/Windows 7
Macintosh : Mac OS X v10.3 or later
When using another system other than Windows XP
(SP2 or later)/Windows Vista/Windows 7, set to
[Storage].
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases:
●
Computers with USB ports installed using an
expansion card, etc.
●
Computers without a factory-installed OS and
home-built computers
For information on using the menus, see "Setup menu" (p. 6).
Application
Turning on the camera with the q
Turning on the camera with the

q Power On]

button [q button [ Power On]
q Power On
r (Settings 1)
Submenu 2
The camera is not turned on. To turn
on the camera, press the n
No
button.
Press and hold the q button to turn
Yes
the camera on in the playback mode.
Saving the mode when the camera is Saving the mode when the camera is
turned off [Keep turned off [Keep z z Settings]
r (Settings 1) Keep z Settings
Submenu 2
The shooting mode is set to P mode
No
when the camera is turned on.
The shooting mode is saved when
the camera is turned off and is
Yes
reactivated the next time the camera
is turned on.
Choosing the opening screen display Choosing the opening screen display
[Pw On Setup] [Pw On Setup]
r (Settings 1) Pw On Setup
Submenu 2
Off No opening screen is displayed.
The opening screen is displayed
On
when the camera is turned on.
q
Application
Settings]
Application
Application
EN
49