Olympus SP-610UZ Instruction Manual page 14

Turn off the camera before opening the battery/card
compartment cover.
When using the camera, be sure to close and lock
the battery/card compartment cover.
When to replace the batteries When to replace the batteries
Replace the batteries when the error message shown
below appears.
Flashes in red
00:34 00:34
4 4
14
M
Monitor top left
Setting up using the supplied CD
Connect the camera to the computer for set up using the
supplied CD.
User registration using the supplied CD and
installation of ib computer software is available on
Windows computers only.
We recommend that you use a computer equipped
with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7.
14 EN
Windows Windows
1
Windows XP
Windows Vista/Windows 7
Battery Empty
Error message
2
Insert the supplied CD in a CD-ROM drive.
●
A "Setup" dialog will be displayed.
●
An Autorun dialog will be displayed. Click "OLYMPUS
Setup" to display the "Setup" dialog.
If the "Setup" dialog is not displayed, select "My
Computer" (Windows XP) or "Computer" (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
"OLYMPUS Setup" window and then double-click
"Launcher.exe".
If a "User Account Control" dialog is displayed, click
"Yes" or "Continue".
Follow the on-screen instructions on your
computer.
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. In this case, disconnect
the camera, and reconnect after replacing the battery
with a new one.