Sr+ Setup For Pioneer Plasma Displays; Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer RCS-LX60D Operation Instructions Manual

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a
Pioneer plasma display to this unit using an SR+ cable.
3 ページ ２００７年４月２４日 火曜日 午後７時５７分
ections
connections
1 Press SR+.
2 Use the
press ENTER.
t
3 Use the
ng this system or changing
want to adjust.
e sure to switch power off and
The current setting is shown for each option as you cycle
power cord from the wall socket.
through the display. See below for a full list and
g all connections, connect the power
description of each.
socket.
4 Use the
5 Repeat steps 3 and 4 to make other settings.
auxiliary components
6 When you're done, press ENTER to leave the SR+
tical-type digital inputs. Use these to
setup menu.
mponents, such as your MD or CD
Automatic plasma display volume muting
A UDIO INPUT
When Volume Control is switched on, the volume of the
DIGITAL
plasma display is automatically muted when the receiver
VR1 DVD/DVR2 DIGITAL
AL) (OPTICAL) subwoofer is switched on, or the receiver subwoofer's (OPTICAL)
input function is changed to one that you would want to
hear the sound from the receiver subwoofer rather than
ANTENNA
the plasma display (DVD, for example).
FM UNBAL 75 AM LOOP ANTENNA
MCACC
SETUP MIC CONTRO L IN AUDIO INPUT
• VOL.C ON – When this unit is switched on, or the
DIGITAL
SPEAKERS
L DVD/DVR1 DVD/DVR2 DIGITAL ANALOG
(COAXIAL) (OPTICAL) (OPTICAL)
R L
SUBWOOFER SURROUND
input function is changed, the volume on the plasma
L
display is muted so only sound from this unit is
R
UNIT.
AL.
R L
CENTER FRONT
heard.
• VOL.C OFF – This unit does not control the volume of
the plasma display.
To digital audio
output (optical)
corder, etc.
VD/DVR2 (OPTICAL) or DIGITAL
the rear panel to the optical
rnal playback component.
al components such as an MD player,
game system.
analog audio component
Downloaded From TheatreSystem-Manual.com Manuals
NALOG input jacks to connect an
onent, such as a tape player. See
/ / TIMER REC REC MODE
+ + +
SETUP / TUNE SR SR
ONE TOUCH COPY
1 2 2 3 3
- +
ENTER ENTER
/ ST / ST PAUSE LIVE TV
4 4 5 5 6 6
-
F. S. SURR / TUNE TEST TONE VIDEO IN
7 8 8 9
SURROUND ADVANCED SOUND MENU
0
SLEEP CLEAR
JUKEBOX
INPUT CHANNEL VOLUME DISPLAY
TEXT TV/DVD RDS DISP
TV CONTROL
MAIN MAIN SUB SUB
buttons to choose SETUP, then
Listening to an external audio source
buttons to choose the setting you
You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include your TV. See also Using this system for
TV audio on page 14 and Connecting auxiliary
buttons to adjust the setting.
components above.
1 If the system isn't already on, press
to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2 Use the AUDIO IN button to select an audio input
source.
3 If necessary, start playback of the external
source.
Automatic plasma display input switching
In order that the plasma display can switch automatically
to the correct input when you switch the input function of
the receiver subwoofer, you need to tell it how your
system is connected.
For example, if you connected your HDD/DVD recorder to
the DV1 input on the receiver subwoofer, and to input 2
on your plasma display, select the DV1 PDP2 setting here
so that when you switch the input function of the receiver
subwoofer to DV1 to watch your HDD/DVD recorder, the
plasma display will automatically switch to input 2.
For each receiver subwoofer input function (DV1 (DVD/
DVR1), DV2 (DVD/DVR2), DIG (DIGITAL), ANA
(ANALOG)) you can select:
• NONE – does not switch the plasma display input
• PDP1 to PDP7 – switches the plasma display input to
one of the numbered inputs. (Note that the number
displayed may vary depending on the plasma display
to which you connect this unit.)
• TVTN – switches the plasma display to its built-in
TV tuner
Note
• Note that certain PDP inputs (ex. PDP7) may be
referred to on your plasma display as 'PC Input'.
• The SR+ setting remains in effect even in standby.
• The SR+ setting does not affect the FM/AM tuner
function.
RECORDER
RECEIVER RECEIVER
Using the SR+ mode with a Pioneer plasma
SOUND
HDD/DVD FM/AM AUDIO IN AUDIO IN RETRIEVER
display
PAUSE PLAY STOP
1 Press SR+ on the remote.
2 Use
• The SR+ setting is maintained even after switching
the receiver subwoofer into standby then back on.
Automatic muting and input switching will be
effective when the receiver subwoofer is switched on.
• If you disconnect the SR+ cable or switch the plasma
display off while SR+ is on, the SR+ ON setting
remains.
DVD/DVR1 DVD/DVR2
• To switch to SR+ OFF, follow steps 1 and 2, selecting
SR+ OFF.
ANALOG DIGITAL
Note
• You can control this unit with the plasma display's
remote sensor even in standby, but you can't control
this unit with either this unit's remote sensor or the
plasma display's remote sensor when the plasma
display is switched off (AC off) and the SR+ cable is
connected to the CONTROL IN jack of this unit.
9
to select SR+ ON then press ENTER.
RECEIVER
En