Table of Contents
Advertisement
Switching audio channels
DVD (VR) DVD-RAM HDD
k 97 ページ ２００７年４月２４日 火曜日 午後７時５８分
1
For HDD
and VR mode content recorded with bilingual
audio, you can switch between left (L) channel, right (R)
channel, or both (L+R).
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
Some Super VCDs have two soundtracks. With these
discs you can switch between the two soundtracks as
well as individual channels in each.
AUDIO
+
•
MAIN
SUB
o CD DivX
audio channel.
The audio channel(s) currently playing are indicated on-
日 火曜日 午後７時５８分
ction allows you to specify two points
screen.
rack or title that form a loop which is
1
r.
HDD DVD (VR) DVD-RAM
L+R – Both channels (default)
L – Left channel only
g playback, select 'A-B Repeat'
R – Right channel only
de menu.
Loop Start)' highlighted, press at
Video CD WMA/MP3
CD
nt the loop to start.
Stereo – Stereo (default)
Alternatively, for a CD, Video CD, Super VCD or WMA/
1/L – Left channel only
MP3/DivX disc, you can press DISC NAVIGATOR , which
2/R – Right channel only
A (Loop Start)
takes you straight to the Disc Navigator screen.
gator in
B (Loop End)
Off
Super VCD
choose
ENTER
n at the
3
Select what you want to play.
1 Stereo – Soundtrack 1/Stereo (default)
Depending on the type of disc you have loaded, the Disc
1 L – Soundtrack 1/Left channel
Navigator looks slightly different, but they are all navigated
1 R – Soundtrack 1/Right channel
in the same way.
oop End)' highlighted, press at the
2 Stereo – Soundtrack 2/Stereo
2 L – Soundtrack 2/Left channel
e loop to end.
The screen below shows a WMA/MP3/DivX disc.
2 R – Soundtrack 2/Right channel
ely jumps back to the start point and
Navigate to the folder, or the track/title within a folder
d and round.
that you want to play.
DVD-Video, DVD-R/-RW (Video mode),
Disc Navigator
or from the HDD, the start and end
op must be in the same title.
auses playback, or restarts playback
CD
mal playback, select Off from the A-B
hen paused.
WMA/MP3
Divx
r press CLEAR if no menu OSD (such
de menu) is displayed.
ress to start scanning. Press repeatedly
U
o increase the scanning speed.
Note
ress to skip to previous/next track.
1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 143).
When a PBC menu is displayed, press to
2 • When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
Playback starts after you press ENTER .
splay the previous/next page. (During
07
switch the audio channel. Set Dolby Digital Out to Dolby Digital
• For discs that contain CD-Audio tracks and WMA/
ayback you can also use the front panel
if you need to switch the audio channel.
MP3 tracks or DivX titles, you can switch the
H +/– buttons.)
• When playing a Dolby Digital source, you can also switch channels from the Dual Mono menu of the receiver subwoofer — see Dual mono
setting on page 32.
playback area between CD , WMA/MP3 and DivX .
uring playback, enter a track number
This can only be done while the disc is stopped.
enre',
hen press ENTER to skip directly to that
ptions.
ack.
Downloaded From TheatreSystem-Manual.com Manuals
view
ress CLEAR to clear a number entry and
Scanning discs
art again.
(oldest
While a PBC menu screen is displayed,
CD
Video CD Super VCD WMA/MP3
2
Repeat play
Press repeatedly to display/switch the
A L L
There are various repeat play options, depending on the
kind of disc loaded, or if you're using the HDD for
playback. It's also possible to use repeat play together
with programme play to repeat the tracks/chapters in the
programme list (see Programme play below).
ENTER
•
menu, then choose a repeat play mode.
Play Mode
Search Mode
A-B Repeat
Repeat
Programme
• To resume normal playback, select Repeat Off from
the Repeat Play menu, or press CLEAR if no menu
OSD (such as the Play Mode menu) is displayed.
Programme play
HDD DVD-Video
This feature lets you program the play order of titles/
Folder (01-03)
Track(0 0 1-004)
3
01.Rock
001.Intro
chapters
/folders/tracks on a disc or the HDD.
02.Pop
002.Escape
03.Dance
003.Everything You Say
004.What I Do
ENTER
1
menu, then 'Input/Edit Programme'.
The Input/Edit Programme screen varies according to the
disc type. Below is the DVD input screen.
Programme
Step
01.001
02.
03.
04.
05.
06.
07.
08.
Switching camera angles
DVD-Video
Some DVD-Video discs feature scenes shot from two or
more angles — check the disc box for details: it should
be marked with a
scenes. When a multi-angle scene is playing, the same
icon appears on screen to let you know that other angles
are available (this can be switched off if you prefer — see
Angle Indicator on page 143).
+
•
MAIN
SUB
• The angle number is displayed on-screen.
• If the disc was paused, playback starts again with the
new angle.
Displaying disc information on-screen
You can display various on-screen information about the
disc loaded or the HDD.
DISPLAY
•
Display/change the on-screen information.
Select 'Repeat' from the Play Mode
• Press once to show the HDD and removable disc
(DVD, etc.) activity together. Press again to show the
status of just the currently selected playback/
recording device (HDD or removable disc).
Repeat Title
• To hide the information display, press DISPLAY
Repeat Chapter
Repeat Off
repeatedly until it disappears.
HDD and removable disc activity display
Press DISPLAY once to see the HDD and removable disc
(DVD, etc.) activity. Use the HDD/DVD button to switch
between the two kinds of display.
Video CD Super VCD WMA/MP3
CD
Select 'Programme' from the Play Mode
PCM (see Dolby Digital Out on page 141) or listen via the analog outputs
Title (01-03)
Chapter(001-015)
Title 01
Chapter 001
Title 02
Chapter 002
Title 03
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
icon if it contains multi-angle
ANGLE
Switch the camera angle.
2
En
Hide quick links:
Advertisement
Chapters
Table of Contents
