About Hdmi; Using This Unit With A Pioneer Flat; Screen Tv; Sr+ Setup For Pioneer Flat Screen - Pioneer DCS-575 Operating Instructions Manual

Other connections

About HDMI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of
High Bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface (DVI)
in one specification. HDCP is used to protect
digital content transmitted and received by DVI-
compliant displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Using this unit with a Pioneer
Flat Screen TV
If you have a Pioneer flat screen TV
2
use an SR+ cable to connect it to this unit
and take advantage of various convenient
features, such as controlling this unit via the
flat screen TV's remote sensor, automatic
video input switching of the flat screen TV, and
automatic volume muting on the flat screen TV.
Note
1 This system is compatible with all Pioneer flat screen TVs from 2003 onward.
2 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer
Customer Support division for more information on obtaining an SR+ cable.
3 You won't be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT
jack of your flat screen TV. You can use the remote sensor of the flat screen TV (even in standby) as long as the power isn't
switched off.
• With an SR+ cable connected, the remote
must now be pointed towards your flat
screen TV rather than the remote sensor of
this unit in order to control this system.
• Use a 3-ringed miniplug SR+ cable to
connect the CONTROL IN jack of this unit
through a media receiver to the CONTROL
OUT jack of your flat screen TV.
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ Setup for Pioneer Flat Screen TVs below for
detailed instructions.
1
SR+ Setup for Pioneer Flat Screen TVs
, you can
Make the following settings if you have
connected a Pioneer flat screen TV to this unit
using an SR+ cable. Note that the number of
video inputs available will depend on the flat
screen TV you've connected.
1 Press SHIFT+SR+ on the remote.
Use the / to select SETUP, then
2
press ENTER.
Pioneer flat

screen TV

LINE 1
AV CONNECTOR
IN
OPTICAL
LINE 2
MCACC
DIGITAL IN
SETUP MIC CONTROL VIDEO OUT
Important
10
To control
output
3
37
En