Rear Panel (Connections) - D-Link DNS-323 User Manual

Section 1 - Product Overview
Drive Eject Lever
Power Receptacle
Power Receptacle:
The 12V 3A / 5V 3A power supply connects here.
Ethernet Port:
A Gigabit Ethernet port that connects the DNS-323 to a network.
USB Port:
Connect a printer, or UPS to the port. This USB port also supports D-Link SharePort™ technology. Refer to the SharePort™ manual for
more detail.
Drive Eject Lever:
Use the levers to eject the hard drives. The front panel must be removed before ejecting the drives.
Reset Button:
A pinhole button located beside the Ethernet socket is used to reset the DNS-323 to the factory default
Note: After resetting the unit's configuration you will still have access to the data on your hard drive(s).
D-Link DNS-323 User Manual

Rear Panel (Connections)

Ethernet Port
Reset Button
Drive Eject Lever
USB Port
settings.
8