Lan - D-Link DNS-323 User Manual

Section 3 - Configuration
The Local Area Network settings for the DNS-323 are configured on the LAN page.
The LAN Link Speed is set to Auto by default, but
Link Speed
can be manually set to 100Mbps or 1000Mbps.
Click the Apply button.
DHCP Client Selecting DHCP Client will cause the DNS-323
to obtain an IP address from the local DHCP
server.
Static IP Selecting Static IP requires you to assign the IP
information for the DNS-323 manually.
Jumbo Frame
Click the Enable radio button next to Status to
Settings
enable jumbo frames.
D-Link DNS-323 User Manual

LAN

28