D-Link DNS-323 User Manual page 38

Section 3 - Configuration
Port Sets the FTP port. Default is 21.
Passive Mode This allows the client to initiate the connection and the FTP server to randomly open ports for transferring data.
• Use the default port range (55536-55663)
connect.
• Use the following port range:
• Report external IP in Passive mode
Client Language Most standard FTP clients like Windows FTP, only support Western European codepage when transferring files. Support
has been added for non standard FTP clients that are capable of supporting these character sets.
Flow Control Allows you to limit the amount of bandwidth available for each user.
SSL/TLS Select the check box that only allows SSL/TLS connection.
FTP Access List The FTP access for users and groups that has been
created in the FTP Account Settings section can be
edited and deleted here. To modify a FTP rule, click
the corresponding
click the corresponding
Displays the current status of the FTP Server. Click
FTP Server
the Start/Stop FTP server to enable or disable the
Status
FTP server.
In order to use FXP (File Exchange Protocol) for
server-to-server data transfer, please make sure
to change the port from 21 to some other port as
listed in the Port section of the web UI. Also, please
make sure to open the corresponding port on your
router and forward that port from your router to the
DNS-323.
D-Link DNS-323 User Manual
- Click the radio button to open this range of ports for FTP clients to
- Click the radio button and enter a range of ports for FTP clients to connect.
- Select the check box and enter the IP address of the Router.
icon. To delete a FTP rule,
icon.
38