Ganz PIXELPRO SERIES Installation Manual page 10

PixelPro GXi Series
③ Alarm (DO) connection
Only the relay type is supported.
Relay Rating: Max 30VDC/2A, 125VAC/0.5A, and 250VAC/0.25A
Name
NC1
COM1
NO1
NC2
COM2
NO2
!
Do not exceed the maximum relay rating.
Caution
④ LAN connection
This is a RJ45 LAN connector for 10/100 Base-T Ethernet. Use the Ethernet cable (RJ45) to
connect the device to a hub or a router in the network. Refer to Appendix (B). Power over
Ethernet for more details.
⑤ Power connection
The camera can be powered from either 24VAC or PoE+. If the camera is powered via PoE+,
refer to Appendix (B). Power over Ethernet for more details. To operate your camera using
24VAC, make sure the polarity is correct before connecting the power cable. Incorrect
connection may cause damages to the device.
1 2 3
04-2014-A
Descriptions
Normal Close 1
Common 1
Normal Open 1
Normal Close 2
Common 2
Normal Open 2
Function
AC~
AC
FG
input
AC~
ZN-PTZ202XE Installation Guide
Pin
1
2
3
10