ClimateMaster iGate Connect Installation Manual page 28

Table of Contents

Advertisement

DHW Pump Power – displays the power con-
sumption of the DHW pump in watts.
DHW Flow – displays the DHW gpm fl ow rate.
Hot Water EWT – displays the temperature of
the potable hot water entering the potable hot
water heat exchanger.
Hot Water LWT – displays the temperature of
the potable hot water leaving the potable hot
water heat exchanger, returning to the iGate
Smart Tank.
– Refrigerant Diagnostics
Discharge Pressure – displays the refrigerant
discharge pressure.
Discharge Saturation – displays the saturation
temperature of the refrigerant discharge pres-
sure.
Discharge Temp – displays the temperature of
the compressor discharge line.
Suction Pressure – displays the refrigerant suc-
tion pressure.
Suction Saturation – displays the saturation
temperature of the refrigerant suction pres-
sure.
Suction Temp – displays the temperature of
the compressor suction line.
Discharge Superheat – displays the amount of
superheat at the discharge of the compressor.
Suction Superheat – displays the amount of
superheat at the suction to the compressor.
Subcool – displays the amount of subcooling
at the liquid line.
Wtr Coil Liquid – displays the temperature of
the refrigerant liquid line between the source
heat exchanger and the electronic expansion
valve.
Wtr Coil Vapor – displays the temperature of
the refrigerant vapor line between the heat/
cool reversing valve and the source heat
exchanger.
24
Air Coil Liquid – displays the temperature of

Advertisement

Table of Contents
loading

Table of Contents