Powering On / Off The Projector; Powering On The Projector - Optoma EW1691e User Manual

Turn on the
v
projector first
and then
select the
signal sources.
Downloaded From projector-manual.com Optoma Manuals

Powering On / Off the Projector

Powering On the Projector

1. Connect the power cord to the projector.
2. Turn On the connected devices.
3. Ensure the Power LED is steady (flashing) and then press the
Power button to turn On the projector.
The projector splash screen displays and connected devices are
detected. If the connected device is a PC, press the appropriate
keys on the computer keyboard to switch the display output to
the projector. (Check the user manual of the PC to determine the
appropriate Fn key combination to change display output.)
See Setting an Access Password (Security Lock) on page 37
if security lock is enabled.
4. If more than one input device is connected, press the "Source"
button to switch between devices sequentially.
For direct source selection, see page 21.
(DVD and HDTV are supported through the VGA connector)
Installation
 English