Optoma TW675UST-3D User Manual
  1. Manuals
  2. Brands
  3. Optoma Manuals
  4. Projector
  5. TW675UST-3D
  6. User manual

Optoma TW675UST-3D User Manual

Optoma tw675ust-3d: user guide
Hide thumbs Also See for TW675UST-3D:
Table of Contents

Advertisement

Quick Links

Table of Contents ............................1
Usage Notice ...................................2
Safety Information ...............................2
Precautions .........................................3
Eye Safety Warnings ..........................5
Product Features ................................5
Introduction ......................................6
Package Overview ..............................6
Product Overview ...............................7
Main Unit .............................................. 7
Control Panel ....................................... 8
Input/Output Connections .................... 9
Remote Control .................................. 10
Interactive Pen ................................... 11
Installation .....................................12
Connecting the Projector ..................12
Cover ................................................. 12
Connect to Video Sources ................. 14
Powering On the Projector ................. 15
Powering Off the Projector ................. 16
Warning Indicator ............................... 16
User Controls ................................20
Control Panel ..................................... 20
Remote Control .................................. 21
Interactive Pen ................................... 22
On-screen Display Menus ................26
How to operate ................................. 26
Menu Tree .......................................... 27
IMAGE ............................................... 30
IMAGE | Advanced ............................ 32
DISPLAY ............................................ 34
DISPLAY | 3D ................................... 37

Table of Contents

SETUP ............................................... 38
SETUP | Signal (RGB) ....................... 41
SETUP | Security ............................... 42
SETUP | Advanced ............................ 44
SETUP | Network ............................... 45
OPTIONS ........................................... 50
OPTIONS | Advanced ........................ 52
OPTIONS | Lamp Settings ................. 53
OPTIONS | PointBlank ...................... 54
Ruby Introduction ..............................56
How to use Web Control ................... 56
Appendices ....................................70
Troubleshooting ................................70
Replacing the lamp ...........................76
dust filter ...........................................78
Compatibility Modes .........................79
Computer Compatibility ..................... 79
Video Compatibility ............................ 80
Function List .....................................81
RS232 Pin Assignments .................... 81
Wall Mount Installation ......................86
Optoma Global Offices .....................87
1
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TW675UST-3D and is the answer not in the manual?

Questions and answers

Related Manuals for Optoma TW675UST-3D

Summary of Contents for Optoma TW675UST-3D

  • Page 1: Table Of Contents

    How to use Web Control ....56 Control Panel ........8 How to use the Card Reader .... 63 Input/Output Connections ....9 How to use the Optoma Presenter ... 66 Remote Control ........10 Appendices ........70 Interactive Pen ........11 Troubleshooting ........70...

  • Page 2: Usage Notice

    Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. 7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock.

  • Page 3: Precautions

    Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀■ Warning- To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
  • Page 4 Usage Notice  Turn off and unplug the power plug from the AC outlet before cleaning the product.  Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is ...

  • Page 5: Eye Safety Warnings

    Usage Notice Eye Safety Warnings ▀■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.

  • Page 6: Introduction

    Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. VGA Cable 1.8m Projector with lens cap Power Cord 1.8m  Due to different IR Remote Control 2 ×...

  • Page 7: Product Overview

    Introduction Product Overview Main Unit AUDIO1-IN RS-232 VIDEO S-VIDEO HDMI PB/MOUSE (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT SERVICE 12V OUT DISPLAY AUDIO OUT USB / AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr RJ-45 1. Control Panel 9. Focus Lever 2. IR Receivers 10.

  • Page 8: Control Panel

    Introduction Control Panel 1. Lamp LED 2. Temp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu English...

  • Page 9: Input/Output Connections

    Introduction Input/Output Connections AUDIO1-IN RS-232 VIDEO S-VIDEO HDMI PB/MOUSE (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT SERVICE 12V OUT 12V OUT DISPLAY USB / AUDIO OUT AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr RJ-45 1. 12V Trigger Relay (12V, 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 3.

  • Page 10: Remote Control

    Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 8. Volume +/- 9. 3D 10. AV mute  The interface 11. Video is subject to 12.

  • Page 11: Interactive Pen

    Introduction Interactive Pen 1. Battery Cover 5. Lens 2. Mouse Right Click 6. Nib  The interactive 3. Menu 7. Power On/Off pen is optional 4. Mouse Left Click 8. LED Indicators accessory. Warning: • Danger of explosion if battery is incor- rectly replaced.

  • Page 12: Installation

    Installation Connecting the Projector Removing and Attaching the Cable Cover Cable Cover Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover. 1 2. Lift up and remove the cable cover. 2 Install the cable cover by reversing the previous steps. English...

  • Page 13: Connect To Computer/Notebook

    Installation Connect to Computer/Notebook +12V Output Audio Output MOLEX MOLEX molex AUDIO1-IN PB/MOUSE RS-232 VIDEO S-VIDEO HDMI (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT SERVICE 12V OUT  Due to the DISPLAY AUDIO OUT USB / AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr RJ-45 difference in applications...

  • Page 14: Connect To Video Sources

    Installation Connect to Video Sources S-Video Output Composite Video Output DVD Player, Set-top Box, HDTV receiver +12V Output Audio Output AUDIO1-IN RS-232 VIDEO S-VIDEO HDMI PB/MOUSE (VGA1/VGA2) VGA1-IN / SCART / YPbPr VGA-OUT SERVICE 12V OUT DISPLAY AUDIO OUT USB / AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr RJ-45...

  • Page 15: Powering The Projector On / Off

    Installation Powering the projector On / Off Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 2. Turn on the lamp by pressing “ ” button either on the top of the projector or on the remote.

  • Page 16: Powering Off The Projector

    Installation Powering Off the Projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector. The following message will be displayed on the screen. Press the “ ” button again to confirm otherwise the message will disappear after 15 seconds.

  • Page 17: Adjusting The Projected Image

    Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it.

  • Page 18: Adjusting The Projector's Focus

    Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear.  XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm).  WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to 661 mm).
  • Page 19 Installation ( W ) B=> Vertical distance between lens center and screen center C,E=> Throw distance ( H ) Screen Center D=> Vertical distance between lens center and bottom of screen (top of screen for ceiling mount) α=> T hrowangle ( B ) Throw Angle (α) ( D )

  • Page 20: User Controls

    User Controls Control Panel & Remote Control Control Panel Using the Control Panel Power/ Refer to the “Power On/Off the Projector” section on pages 15-16. Standby but- ton and LED Indicate the projector’s status. Automatically synchronize the projector to the input RE-SYNC source.

  • Page 21: Remote Control

    User Controls Remote Control Using the Remote Control Refer to the “Power On/Off the Projector” Power section on pages 15-16. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down.

  • Page 22: Interactive Pen

    User Controls Using the Remote Control Momentarily turns off/on the audio and AV mute video. S-Video S-Video Press “ ” to choose S-Video source. Press “VGA” to choose VGA sources. Press “Video” to choose Composite video Video source. Interactive Pen Using the Interactive Pen Power On/Off the Interactive Pen.

  • Page 23: Using The Help Button

    User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the “?” button on the remote control or press the  “HELP” button on the control panel to open the Help Menu. English...
  • Page 24 User Controls Help menu button functions only when no input source  is detected.  Please refer to the “Troubleshooting” section on pages 70-75 for more details. If input source is detected and help button is pressed, the  following pages will appear to help diagnose any problems. English...
  • Page 25 User Controls English...

  • Page 26: On-Screen Display Menus

    User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad.

  • Page 27: Menu Tree

    User Controls Menu Tree Main Menu Sub Menu Settings Image Display Mode Presentation / Bright / Movie / sRGB / Blackboard / Classroom / User / 3D Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / PC BrilliantColor™...
  • Page 28 Mute On / Off Volume 0~10 Audio Input Default / Audio1(Phone jack) / Audio2 (RCA R/L) Advanced Logo Optoma / Neutral / User Logo Capture Closed Captioning Off / CC1 / CC2 Exit Network Network State DHCP IP Address Subnet mask...
  • Page 29 User Controls Please note that the on-screen display (OSD) menus vary according to the  signal type selected and the projector model you are using. ) “Color” and “Tint” are only supported in Video mode.  ) For XGA model only. ...

  • Page 30: Image

    User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater.  sRGB: Standardised accurate color. ...
  • Page 31 User Controls Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness.  Press the to increase the sharpness.  Color Adjust a video image from black and white to fully saturated color. “Color” and “Tint”  Press the to decrease the amount of saturation in the image.

  • Page 32: Image | Advanced

    User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater.  Video: for video or TV source.  Graphics: for image source.

  • Page 33: Color Space

    User Controls Color Space Select an appropriate color matrix type from AUTO, RGB or YUV. Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection.

  • Page 34: Display

    User Controls DISPLAY Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources.  16:9-I: This format is for 16×9 input sources, like HDTV and  DVD enhanced for Wide screen TV. (576i/p) 16:9-II: This format is for 16×9 input sources, like HDTV and ...
  • Page 35 User Controls WXGA 4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD  enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen ...
  • Page 36 User Controls Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of Each I/O has  video source. different setting of “Edge mask”. Zoom “Edge mask” and ...

  • Page 37: Display | 3D

    User Controls DISPLAY | 3D Off: Select “Off” to turn 3D settings off for 3D images.  DLP Link: Select “DLP Link” to use optimized settings for DLP  Link 3D images. “IR” options may  IR: Select “IR” to use optimized settings for IR-based 3D vary according to ...

  • Page 38: Setup

    User Controls SETUP Language Choose the multilingual OSD menu. Press into the sub menu and then use the key to select your preferred language. Press “Enter” to finalize the selection. “Screen Type” is for  WXGA only. Screen Type Choose the screen type from16:10 or 16:9. Projection Front-Desktop ...
  • Page 39 User Controls Rear-Ceiling  When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232.
  • Page 40 User Controls SETUP Volume Press the to decrease the volume.  Press the to increase the volume.  Volume adjustment  Audio Input can also control MIC volume. The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source.

  • Page 41: Setup | Signal (Rgb)

    User Controls SETUP | Signal (RGB) “Signal” is only  supported in Analog VGA (RGB) signal. Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto- matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again.

  • Page 42: Setup | Security

    User Controls SETUP | Security Security On: Choose “On” to use security verification when the turning  on the projector. Off: Choose “Off” to be able to switch on the projector without  password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the projector can be used.
  • Page 43 User Controls If the incorrect password is entered 3 times, the projector will  automatically shut down. If you have forgotten your password, please contact your local  office for support. English...

  • Page 44: Setup | Advanced

    Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered Optoma: The default startup screen.  Neutral: Logo is not displayed on startup screen. ...

  • Page 45: Setup | Network

    User Controls SETUP | Network Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect on next open. On: Assign an IP address to the projector from an external ...

  • Page 46: How To Use Web Browser To Control Your Projector

    User Controls How to use web browser to control your projector 1. Turn on DHCP to allow the DHCP 4. Based on network web-page for the server to automatically assign an IP, or input-string in [tools] tab, the limitation for manually enter the required network Input-Length is in the below list (“space”...
  • Page 47 User Controls When making a direct connection from your computer to the projector Step 1: Find an IP Address (192.168.0.100) from LAN function of projector. Step 2: Select apply and press “Enter” button to submit function or press “menu” key to exit.

  • Page 48: Crestron Roomview Control Tool

    User Controls Crestron RoomView Control Tool Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector’s online status, system power, lamp life, network setting and hardware faults, plus any custom attribute as defined by the Administrator.
  • Page 49 User Controls 3. Edit Attribute 4. Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. English...

  • Page 50: Options

    User Controls OPTIONS Source Lock On: The projector will only search current input connection.  Off: The projector will search for other signals if the current  input signal is lost. High Altitude When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
  • Page 51 User Controls Optional Filter Installed Select “Yes” to display warning message after 500 hours of use. Select “No” to turn off warning message. Reset Filter Warning Select “Yes” to reset the dust filter hour counter after replacing or cleaning the dust filter. Reset Choose “Yes”...

  • Page 52: Options | Advanced

    User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control.

  • Page 53: Options | Lamp Settings

    User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp.

  • Page 54: Options | Pointblank

    User Controls OPTIONS | PointBlank Interactive Choose “On” to enable Interactive and activate the Interactive menu. Dual Pen Choose “On” to enable dual pen simultaneously. Interactivity is sup-  ported only in the fol- Pointer Motion lowing input modes: VGA and HDMI from Choose this function to select the Pointer Motion mode: “Normal”, a PC, and Wire- “Draw”, and “Stable”.
  • Page 55 User Controls Choose this function to select the function of the Menu button on the interactive pen.  Pointer Motion: Function as toggling among “Normal”, “Draw”, and “Stable” mode  PowerPoint Annotation: Function as annotating in the Power- Point slide show. ...

  • Page 56: Ruby Introduction

    USB capability • Web Control • Card Reader • Optoma Presenter How to use Web Control The Web Control application allows user to configure the projec- tor remotely base on various network protocol. It is convenient for administrator to control the whole projectors in one building by one PC.

  • Page 57: System Status

    There are 3 options in this page. • Click “Download”, it displays the interface to download the soft- ware of “Optoma Presenter”. • Click “Crestron”, to enter the control page of Flash UI. • Click “Admin”, the log-in page shows up.
  • Page 58 User Controls Alert Setup This page is to set up the alert notification for kinds of error types by sending mail. Alert type is multi-options. SMTP Mail Setup This page is to set up the details of mail sending, ex. mail server IP address, user name, password and mail address of receivers.
  • Page 59 User Controls • IP Setup: Click “Obtain an IP address automatically” as auto mode; click “Use the following IP Address” as static mode, IP Ad- dress/Subnet Mask/Default Gateway/ DNS Server are required to be filled and then click “Apply” button. •...

  • Page 60: Crestron Roomview

    User Controls Click the following icons under “Play Control” • : Click to disconnect host PC. • : Click to switch session to background. • : Click to change display region. Crestron RoomView This is the control page of Flash UI. Click “Power”...
  • Page 61 User Controls Click “Tools”, the following items are included: • Crestron Control: the basic network information of the control system device. • Projector: the ID of each projector in a building for Administrator to control. • User Password: change user’s password. •...
  • Page 62 User Controls Click “Help” to inform administrator to do related protection or operation. Reset to Default Click “Apply” to reset system to the default settings. Click “Flash Upgrade” to upgrade the Firmware from USB disk, which has been inserted in projector. Reboot System Click “Reboot”...

  • Page 63: How To Use The Card Reader

    User Controls How to use the Card Reader The Card Reader application can display packaged images in a USB flash device. Plugging the USB device into USB port of projector, source of Flash Drive is detected, and then USB Flash Devices Detection Screen is displayed.
  • Page 64 User Controls • File Name On/OFF: Enable/Disable file name display in Thumb- nail Display Mode. Press Up/Down/Left/Right key to choose different functions and press Enter key to make it effect. 3. In the menu of Thumbnail mode, choose Display function, or choose file and press “Enter”...
  • Page 65 User Controls • Stop: Stop Slide Show Mode. • Delay 3/4/5: Slide Show delay in seconds. • Slide Effect: Following modes are supported. (Slide Right/Slide Down/Slide Up/Slide Auto) • Repeat ON/OFF: Enable/Disable Slide Show Repeat Mode. Press Up/Down/Left/Right key to choose different functions and press Enter key to make it effect.

  • Page 66: How To Use The Optoma Presenter

    Press the Autorun icon in the right-down region to pause or play the USB display. --> 2. After installation in PC, double click the program of Optoma Pre- senter to enter main window. • : Connect and search network display.
  • Page 67 2. Input “User type” and “Password” in log-in interface. Display port can be selected, default is “Full screen”. 3. After log-in, Optoma Presenter will modify PC resolution to Ruby supported resolution, and the buttons of become available.
  • Page 68 User Controls • Fixed size mode: FIXED mode allows the user to place a frame on the desktop and only the image enclosed inside the frame is transferred to remote network display. The user can change the width and height of the frame by setting up in page “Parameter Setting”->”Basic Setting”...
  • Page 69 User Controls • : For Administrator user login. • : For Normal user login. • : Status of the connection for connected • : Status of the connection for not connected. • : For the status and display position of local screen on the network display, change it by clicking on it and a dialog box ap- pears.

  • Page 70: Appendices

    Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and ...
  • Page 71 Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200). If you are using a Notebook: ...
  • Page 72 Appendices Image is out of focus Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance.  See page 18. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will ...
  • Page 73 Appendices Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may  make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”...
  • Page 74 Appendices On Screen Messages Temperature warning:  Fan failed:  Lamp warning:  Out of display range:  Filter warning:  If the remote control does not work Check the operating angle of the remote control is within ±15°  both horizontally and vertically of one of the IR receivers on the projector.
  • Page 75 Appendices If the Interactive pen does not work Check the input source is PC (VGA, HDMI, Wireless and LAN  source) Check the Interactive function is turned On.  When using Wireless or LAN connection, and the Pen does not ...

  • Page 76: Replacing The Lamp

    Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.

  • Page 77: Lamp Replacement Procedure

    Appendices The screws on the  lamp cover and the lamp cannot be removed. The projector  cannot be turned on if the lamp cover has not been placed back on the projector. Do not touch the  glass area of the lamp.

  • Page 78: Replacing And Cleaning The Optional Dust Filter

    Appendices Replacing and cleaning the optional dust filter We recommend cleaning the dust filter after every 500 hours of use, clean it more often if the projector is used in a dusty environment. If the dust filter is  installed, proper When you see this message, please find following steps for maintenance will cleaning procedure:...

  • Page 79: Compatibility Modes

    Appendices Compatibility Modes Computer Compatibility  V-Sync (Hz) H-Sync (KHz) Mode Resolution Analog Digital Analog Digital 640 × 350 31.50 31.50 640 × 350 37.90 37.90 640 × 400 37.90 37.90 640 × 480 31.50 31.50 640 × 480 640 × 480 37.90 37.90 640 ×...

  • Page 80: Video Compatibility

    Appendices Computer Compatibility  Mode Resolution V-Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 60.24 1152 × 870 75.06 68.68 MAC G4...

  • Page 81: Rs232 Commands And Protocol Function List

    Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments  RS232 shell is Spec. grounded. Pin no. (from projector side) English...

  • Page 82: Rs232 Protocol Function List

    XX=00-99, projector's ID, Baud Rate : 9600 XX=00 is for all projectors Data Bits: 8 Parity: None Optoma EX665UT/EW675UT/EX565UT RS232 Command Table v1.2 1. There is a <CR> after Stop Bits: 1 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- all ASCII commands. Flow Control : None Baud Rate : 9600 Note : There is a <CR>...
  • Page 83 Appendices --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX39 11 7E 30 30 33 39 20 31 31 0D Flash Drive ~XX39 12 7E 30 30 33 39 20 31 32 0D Presenter(LAN+Wireless) ~XX39 13 7E 30 30 33 39 20 31 33 0D USB Display ~XX44 n 7E 30 30 34 34 20 a 0D Tint...
  • Page 84 Volume n = 0 (a=30) ~ 20 (a=32 30) ~XX82 1 7E 30 30 38 32 20 31 0D Logo Optoma ~XX82 2 7E 30 30 38 32 20 32 0D User ~XX83 1 7E 30 30 38 33 20 31 0D...
  • Page 85 Appendices --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX140 15 7E 30 30 31 34 30 20 31 35 0D Keystone + ~XX140 16 7E 30 30 31 34 30 20 31 36 0D Keystone - ~XX140 17 7E 30 30 31 34 30 20 31 37 0D Volume - ~XX140 18 7E 30 30 31 34 30 20 31 38 0D...

  • Page 86: Wall Mount Installation

    Wall Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector...

  • Page 87: Optoma Global Offices

    Appendices Optoma Global Offices For service or support please contact your local office. 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www.optoma.ca services@optoma.com Europe...
  • Page 88 Appendices Benelux BV Randstad 22-123 +31 (0) 36 820 0253 1316 BW Almere +31 (0) 36 548 9052 The Netherlands www.optoma.nl Latin America 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com services@optoma.com Korea WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku,...

  • Page 89: Fcc Notice

    Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.

  • Page 90: Operation Conditions

    Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation.

This manual is also suitable for:

Tw675uti-3dTw675utim-3dTx665uti-3dTx665utim-3dTx665ust-3dEx665ut ... Show all

Table of Contents