5-2. Full-Face Thermal Label Paper Roll
(1) Label paper specification
Backing paper width:
Outer roll diameter:
Take up paper roll width: 0
Thickness:
Core outer/inner diameter: core inner diameter ø.± mm/core outer diameter
Printed surface:
Tail end handling:
() Recommended label paper
Product
Manufacturer
name
Lintec
LD
Lintec
LD0
Ricoh
0LHB
Note:
) Depending on the type and thickness of the paper, it may be necessary to change the
settings for printing darkness. To change the darkness settings, use the printing dark-
ness settings command <ESC><RS> 'd' n. Refer to the separate programmer's manual
for details.
) The print density may vary depending on the type of paper roll, operating environment,
and power consumption mode.
) A reader or scanner may not be able to scan a printed bar code or characters depending
on the print density. Make sure that your reader or scanner is able to scan correctly
beforehand.
.±0. mm or .±0. mm
ø00 mm or less
mm or
+0.
-
Max. 150 μm
ø± mm
Outer edge of roll
Do not use paste or glue to secure the paper roll or its
core.
Do not fold the tail end of the paper.
Quality
features/
applications
For distribution
or information
control
For measurement
For distribution
or information
control
– –
mm
+0.
-
Thickness (μm)
Base
Separator
material
6
6
–
Adhesion
Total
type
thickness
High
adhesion
0
High
adhesion
–
High
adhesion