Connect To The Computer; Parallel Port - Oki OKIPAGE 18 Quick Start Manual

Digital led printer

Hide thumbs Also See for OKIPAGE 18:

Table of Contents

Enlarged version

Connect to the Computer:

PC Systems

Connection

For the best results, use a bi-directional parallel printer

cable marked IEEE 1284-compliant.

1 Printer and computer OFF.

2 Insert the connector, secure with the clips.

3 Connect to the computer; tighten the screws.

Be sure not to over-tighten the screws–this could damage

the screw posts on your computer.

4 Turn the printer and computer on.

Cable Requirements

To comply with FCC regulations, the cable must be

shielded with twisted pair conductors, and must be UL and

CSA approved.

Maximum length for standard bi-directional cable is 6 feet

(1.8 meters). For lengths greater than 6 feet, use a cable

marked IEEE 1284-compliant.

Printer connector is IEEE 1284-B receptacle (36 pins,

0.085" center line).

Port supports bi-directional IEEE 1284 communications

(compatibility, nibble, and ECP modes).

Quick Start

E-15

Table of Contents

Okipage18n