Connect To Your Computer - Oki Okipage 8z Quick Setup

4
Install Toner
Unwrap toner cartridge. Shake
Lift out toner well cover and discard.
side to side to distribute toner.
5
Insert Paper
Adjust left guide for paper size. Insert a stack of paper. (max. 100 sheets, 20 lb.)
6

Connect to Your Computer

Connecting to a USB Port
For Windows 98/2000 and Macintosh Computers with a USB
port. Requires USB cable.
1 Connect the USB cable to the computer's USB port.
2 Connect the other end of the USB cable to the printer's USB
port.
3 Go to Step 7, Install the Printer Software.
With label up, place left side
under tab
Pulling firmly, remove
tape from bottom. toner well.
Adjust the right guide gently against the paper.
Connecting to a Parallel Port
Requires IEEE 1284-compliant bi-directional parallel cable.
1 Make sure the computer and printer are turned off.
2 Connect the parallel cable to the computer's parallel port.
Secure the screws.
3 Connect the other end of the cable to the printer's parallel
port. Secure it with the wire clips.
4 Go to Step 7, Install the Printer Software.
, lower into the
Push lock lever down towards rear.
Make sure power is off.
Close the cover.
Plug the power cord into the printer and into a
grounded electrical outlet.