Oki ML6300 User Manual page 53

PROBLEM
The selected skip over
perforation spacing
does not match the
physical tear-off
perforation positions.
Abnormal switchover between cut sheet and continuous forms modes.
No cut sheet feed.
No continuous forms
feed.
Paper feed operations
for both cut sheets and
continuous forms are
actuated.
CAUSE
The paper length
selected in the
application does not
match the physical
paper length.
The printer is in
continuous forms mode.
The printer is in cut
sheet mode.
The cut sheet is not
ejected.
Troubleshooting > 53
ACTION
Match the paper length
selected in the
application with the
physical paper length in
use.
Select the paper length
in number of lines in the
application.
Set the Paper Type
lever to cut sheet mode.
Set the Paper Type
lever to continuous
forms mode.
Eject the cut sheet.