ITEM
Wait Time
I-Prime
Auto Feed XT
*EPSON only
I/F Bi-Direction
TOF Adjustment
(Cut Sheet)
Rear Load Adjustment
Cut Position Adjust
FUNCTION
Select the waiting time
between setting paper
on the tray and feeding
it while the printer is
waiting for paper to be
fed in cut-paper manual
feed mode.
Select whether to print
or clear buffer contents
upon initialisation by
receiving I-PRIME.
Set the validity of an
Auto Feed XT signal.
Set whether to return a
device ID or not in
accordance with
IEEE1284.
Select an adjustment
value for the reference
position in regard to the
TOF position of cut-
paper/passbooks.
The position moves to
the rear of the form by
[+] and to the top of
the form by [-] in 1/
60 in increments.
Select an adjustment
value for the reference
position in regard to the
TOF position of a
continuous form.
The position moves to
the rear of the form by
[+] and to the top of
the form by [-] in 1/
60 in increments.
Select an adjustment
value for the position to
cut the end of a
continuous form. (In 1/
90 in increments)
Operating instructions > 39
SETTING
500 ms
1 sec
2 sec
Invalid
Buffer Clear
Buffer Print
Valid
Invalid
Enable
Disable
-7 – -1
0
+7 – +1
-7 – -1
0
+7 – +1
-7 – -1
0
+7 – +1