Oki ML6300 User Manual page 36

ITEM
Rcv Buffer
Print Suppress Effective
Auto LF
Auto CR
*IBM PPR only
SI Select Pitch (10CPI)
*IBM PPR/AGM only
SI Select Pitch (12CPI)
*IBM PPR/AGM only
Reset Inhibit
Select Language Set
*EPSON only
Impact Mode
Print Direction
Command
Power Save Time
FUNCTION
Select size of the
received buffer.
Set whether to enable
or disable a print
suppress setup
command.
Select whether to
perform auto LF
operation or not upon
receiving a CR code.
Select whether to
perform auto CR
operation upon
receiving a carriage
return command.
Set how to handle an SI
command received in
10 CPI mode.
Set how to handle an SI
command received in
12 CPI mode.
Set whether to enable
or disable an initial
command.
Set whether to enable
or disable a
combination of the code
page setting and the
language setting by
menu.
Select print mode on
power on. (This item is
referred to on
initialisation only by I-
PRIME or power on but
not by an initialisation
command.)
Select the validity of a
one-way print setup
command.
Set idle time to enter
power save mode.
Operating instructions > 36
SETTING
0, 2 K, 32 K, 64 K
Yes
No
Yes
No
Yes
No
15 CPI
17.1 CPI
12 CPI
20 CPI
No
Yes
Combined
Code Page Only
Normal
Quiet
Hi Copy
Valid
Invalid
5 min, 10 min, 15 min,
30 min, 60 min