Technical Specifications; Declaration Of Conformity - STEINEL is 360 d trio Operating Instructions Manual

Troubleshooting
Malfunction Cause
IS 360 D TRIO without power y Fuse has blown; not
switched on
y Short-circuit
y Twilight setting in night-
IS 360 D TRIO does
time mode during
not switch on
daytime operation
y Bulb burned out
y Power switch off
Fuse blown
y
Detection zone not
y
correctly adjusted
y Continued movement
IS 360 D TRIO does
within the detection zone
not switch off
y Switched on light is within
detection zone and swit-
ches on again as a result
of temperature change
y Set to continuous
operation by indoor
series switch
y Switched on light is
IS 360 D TRIO keeps
within detection zone
switching ON/OFF
y Animals moving in
detection zone
y Wind is moving trees
IS 360 D TRIO switches
and bushes in the
on when it should not
detection zone
y Cars in the street
are detected
y Sudden temperature
changes due to weather
(wind, rain, snow) or
exhaust air from fans or
open windows
18
Remedy
y Replace fuse, switch on
mains switch, check
wiring with voltage tester
y Check connections
y Adjust setting
y Replace light bulb
y Switch on
Replace fuse, check
y
connection if necessary
y Readjust
y Check zone and readjust
if necessary or apply
shroud
y Readjust zone or apply
shroud
y Series switch to
automatic
y Adjust detection zone or
apply shrouds, increase
distance
y Adjust zone or apply
shrouds
y Adjust zone or apply
shrouds
y Adjust zone or apply
shrouds
y Adjust detection zone or
install in a different place

Technical specifications

Dimensions (H x W x D):
Output:
Connection:
Angle of coverage:
Pivoting range of the sensor:
Reach:
Time setting:
Twilight setting:
Enclosure:

Declaration of conformity

This product complies with
the European Directive on
Low-Voltage Appliances,
73/23/EEC and the EMC
Directive 89/336/EEC.
Functional warranty
This STEINEL product has This warranty shall not
been manufactured with cover damage to wearing
great care, and its operation parts or damage and faults
and safety have been tested caused by incorrect opera-
in conformity with the current tion or maintenance.
regulations. Production is Breakage due to a fall is
also submitted to final also not covered.
random-sample testing.
STEINEL undertakes the Further consequential dam-
guarantee for perfect condi- age to external items is
tion and function. excluded.
The warranty period is 36 Claims under warranty shall
months, starting on the date only be accepted if the
of sale to the user. We product is sent fully assem-
undertake to remedy faults bled and well packed com-
caused by material or manu- plete with sales slip or
facturing defects. This war- invoice (date of purchase
ranty undertaking shall be and dealer's stamp) to the
performed by the repair or appropriate Service Centre
replacement of the defective or handed in to the dealer
parts, at our own discretion. within the first 6 months.
100 x 120 x 120 mm
max. 1000 W (ohmic load, e.g. filament bulb)
max. 500 W (uncorrected, inductive,
cos ϕ = 0,5, e.g. fluorescent lamps)
max. 600 W (electronic ballasts, capacitive,
e.g. energy-saving lights, max. 8)
230–240 V, 50 Hz
h h
360 (with 180 angle of aperture)
Fine adjustment ± 10°
max. 12 m (electronically stabilised)
10 sec. – 15 min.
2–2000 lux
IP 54
Repair Service:
Our Customer Service
Department will repair faults
not covered by warranty or
after the warranty period.
Please send the product
well packed to your nearest
Service Centre.
19