How To Use - Panasonic CS-PC5QKJ Operating Instructions Manual

How to use

i AUTO
To reach temperature quickly
• The unit controls set temperature according to
room temperature to accelerate room cooling.
Set
iAUTO
temperature
• Fan speed is fixed at AUTO, fan speed selection
is prohibited.
• During unit is off, press
with iAUTO mode.
• iAUTO mode can be cancelled by pressing the
respective button again.
• During "i Auto" mode, Eco Smart function is
disabled.
MODE
To select operation mode
iAUTO mode - to reach temperature quickly
• An alternative methode to turn on iAUTO mode.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To adjust horizontal air flow direction
• Manually adjustable.
12
F569558
-1°C
Max = 4 hours
will turn on the unit
Remote control display
iAUTO FAN
SPEED
COOL
AIR
DRY
SWING
OFF ON
TIMER TIMER
ECO
OFF/ON OFF/ON
SMART
i AUTO
MODE FAN SPEED
TEMP TEMP
AIR SWING
TIMER TIMER
ON ON SET SET
1 1 2 2 3 3
OFF OFF CANCEL CANCEL
SET CLOCK CLOCK RESET
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in iAUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then release.
• Press the button again to turn
off.
Remote control receiver
and indicator
(Green)
POWER
(Orange)
TIMER
(Green)
ECO SMART
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
9/26/2013 9:27:34 AM