Step 3 - Tunturi 14PTTR2000 User Manual

Step 3:

Console Assembly to Upright Tubes
• Attach the two interface mounts
(3 left & 4 right) to the console
assembly frame with six M8x12mm
socket head cap bolts (108). Note:
Position mounting brackets (3 & 4) all
the way to the back of the console,
then tighten the screws.
• Connect the console computer cable
(C) to the mating cable (A) from the
upright tube.
• 3. Attach the console assembly to the
top of the uprights with six 3/8" x 3/4"
bolt (105), 3/8" split washer (58) and
3/8" flat washer (59). Be careful not
to pinch the computer cable.
10
Position mounting brackets
(3 & 4) all the way to the back of the
console, then tighten the screws.
58
59
105
108
split washer
flat washer
bold
socket head cap
bolt