Advertisement
HOW TO INSTALL CANOPY
CARA-CARA MEMASANG SENGKUAP
1
Separate the Canopy by loosen the 2 Screws provided.
1
Asingkan Sengkuap dengan melonggarkan 2 Skru yang dibekalkan.
Remove the Screws
Keluarkan Skru
Take the Canopy (2 pieces) and clip it until the "click" sound is heard.
2
2
Ambilkan Sengkuap (2 unit) dan sepitkan sehingga kedengaran bunyi "klik".
Canopy
Sengkuap
Fix the Screws into the Canopy and tighten it.
3
3
Pasangkan Skru pada Sengkuap dan ketatkan.
CHECK POINT AFTER CANOPY INSTALLATION
PEMERIKSAAN SELEPAS PEMASANGAN SENGKUAP
1
1
The Canopy is securely screwed.
Sengkuap diskru dengan kukuh.
K14Z9 1-8
Canopy
Sengkuap
Screw
Skru
Canopy Rib
"Rib" Sengkuap
Ceiling
Siling
Screw
Skru
CAUTION
CAUTION
AWAS
AWAS
Do not assemble Canopy in this opposite
direction.
Jangan memasang Sengkuap pada arah terbalik.
Can cause abnormal noise.
Boleh menyebabkan bunyi luar biasa.
Ceiling
Siling
7
Press
Tekan
Click
Klik
Distance of Canopy from the Ceiling must be more than 5mm.
Jarak Sengkuap dari Siling mestilah lebih daripada 5mm.
Do not place the fan directly on the floor.
Jangan letak kipas di atas lantai.
Can cause scratches to the fan.
Boleh mencalarkan kipas.
Distance of Canopy from the Ceiling
must be more than 5mm.
Jarak Sengkuap dari Siling mestilah
lebih daripada 5mm.
7
12/16/08, 2:36 PM
Pull
Tarik
ATTENTION /
PERHATIAN
Make sure both Canopy Rib fix into
the same level of Canopy Slot for
both side.
Pastikan kedua-dua "Rib" Sengkuap
masuk ke dalam kedua-dua belah
Slot Sengkuap pada tingkat yang
sama.
CAUTION
CAUTION
AWAS
AWAS
Advertisement
