Network Menu - Oki C7100 User Manual

IEEE1394 menu
(Only displayed if IEEE 1394 is installed.)
Item
SPEED
SBP2

Network menu

(Only displayed if a network card is fitted.)
Item
TCP/IP
NETWARE
ETHERTALK
NETBEUI
FRAME TYPE
DHCP/BOOTP
RARP
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
PRINT SETTINGS
INITIALISE
Value
S100; S200; S400
Enable; Disable
Value
Enable; Disable
Enable; Disable
Enable; Disable
Enable; Disable
Auto; 802.2; 802.3
Ether-II; snap
Enable; Disable
Enable; Disable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ON; OFF
ON; OFF
SETTING UP > 59
Description
Sets the upper limit of transfer speed
in communication layer.
(S400: 400MB/Sec. or less).
Display is in English only.
Enables/disables SBP2 protocol.
Description
Selects TCP/IP protocol.
Selects Netware protocol.
Selects EtherTalk protocol.
Selects NetBEUI protocol.
Selects Ethernet frame type.
Selects whether selection of DHCP/
BOOTP is automatic.
Selects whether selection of RARP is
automatic.
Configures IP address of 12
alphanumeric characters.
Configures subnet mask of 12
alphanumeric characters.
Configures gateway address of 12
alphanumeric characters.
Selects printing of network menu map.
Selects network initialisation.