System Configuration Menu - Oki C7100 User Manual

Item
CMY 100% DENSITY

System configuration menu

Item
POWER SAVE
DELAY TIME
PERSONALITY
USB
PS-PROTOCOL
IEEE 1394
PS PROTOCOL
NETWORK
PS PROTOCOL
Value
Disable; enable
Value
5 min; 15 min; 30 min;
60 min; 240 min.
Auto emulation; PCL;
IBM PPR III XL; Epson
FX; Adobe PostScript;
HP-GL2
ASCII
RAW
ASCII
RAW
ASCII
RAW
SETTING UP > 51
Description
Selects enable/disable 100% output
against the CMY100% TRC
compensation. Ordinarily, the TRC
compensation function controls the
appropriate print density; thus, 100%
output is not always enabled.
Selecting ENABLE will allow 100%
output. In actual printing, the TCR
values, too, are controlled by Colour
Matching. This function is used for
special purposes; for example, to
specify the colour for CMYK colour
space in PS.
Description
Sets the time before printer enters
power save mode.
Selects the printer emulation
language. Note: the only printer
languages that can be selected are
those enabled in the Personality
section of the Maintenance menu.
Specifies PostScript (PS)
communication protocol mode of data
from USB. (In RAW mode, Ctrl-T is
invalid.)
Displayed only when IEEE1394 option
board is installed.
Specifies PS communication mode of
data from IEEE1394.
(In RAW mode, Ctrl-T is invalid).
Displayed this Item when OkiLAN
7300e is installed.
Specifies PS communication protocol
mode of data from OkiLAN 7300e .
(In RAW mode, Ctrl-T is invalid.)