Oki C7100 User Manual page 166
Windows 2000
Hide thumbs
Also See for C7100:
- User manual (52 pages) ,
- Reference manual (44 pages) ,
- Software installation manual (20 pages)
Table of Contents
Advertisement
The fuser unit is very hot after printing. Always use the handle when
lifting it.
2.
Move the two locking levers (1) to the rear of the machine to
release the fuser unit.
3.
Using the handle (2), remove the fuser unit from the printer.
4.
Remove the new fuser unit from its packaging.
5.
Using the handle (2), install the new fuser unit into the printer.
6.
Make sure the two spring loaded locking levers (1) lock the
fuser unit into place.
7.
Remove the retaining tape from the coloured, spring loaded
lever (3) on top of the fuser unit.
8.
Close the top cover.
WARNING!
MAINTENANCE > 166
Advertisement
Table of Contents
