Electromagnetic Compatibility; Guidance And Manufacturer's Declaration - Electromagnetic Emissions - CAIRE Companion 5 Technical Manual

Electromagnetic Compatibility

Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to the
EMC information provided in this manual.
Portable and mobile RF communications equipment can affect Medical Electrical Equipment.
The use of Accessories, transducers, and cables other than those specified, with the exception of transducers and cables sold by the
Manufacturer of this device as replacement parts for internal components, may result in increased Emissions or decreased Immunity of
the Companion 5.
The Companion 5 should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the
Companion 5 should be observed to verify normal operation in the configuration in which it will be used.

Guidance and Manufacturer's Declaration - electromagnetic emissions

The Companion 5 is intended for use in the electromagnetic environment specified below. The customer or the user of the
Companion 5 should assure that it is used in such an environment.
Emissions Test
RF emissions
EN 55011
RF emissions
EN 55011
Harmonic emissions IEC
61000-3-2
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Oxygen Concentrator
Compliance Electromagnetic environment - guidance
The Companion 5 uses RF energy only for its internal function. Therefore,
Group 1 its RF emissions are very low and are not likely to cause any interference in
nearby electronic equipment.
Class B
The Companion 5 is suitable for use in all establishments, including domestic
Class A
establishments and those directly connected to the public low - voltage
power supply network that supplies buildings used for domestic purposes.
Complies
PN 14940837 B — 7