NordicTrack Commercial 3600 User Manual page 10

7. Slide the Right Upright Sleeve (96) up against
the console assembly. Attach the Right Upright
Sleeve with two 3/4" Screws (4).
Attach the Left Upright Sleeve (not shown) to the
Left Upright (73) as described above.
8. With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown. Have a second person hold the
treadmill to prevent it from moving forward
or backward.
Firmly tighten the four Upright Bolts (72). With
the help of a second person, lower the treadmill
off the cardboard stand.
9. Note the location of the 75 ohm terminal and the
audio/video input jack on the treadmill. For the
television to operate, the included Audio/Video
Wire Harness (115) and your DVD player or VCR
must be connected to the audio/video input jack
on the treadmill, a personal audio player must be
connected to the audio jack on the console, or a
CATV cable must be connected to the 75 ohm
terminal (see page 11).
10. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or car-
pet from damage, place a mat under the treadmill.
7
73
8
83
72
9
10
4
96
4
74
72
Cardboard
Stand
Audio/
Video
Input
75 Ohm
Terminal
115