C Option (Lpr Command) - Oki B930d User Manual

-u [User name]
This option displays received print data information on users of
specified user names.
-v [Printer name]
This option displays the printer name and the device path name. The
printer name is specified in the argument.
Precautions
• Long file names will be truncated.
• Up to 64 print instruction information can be displayed.
• If two or more types of print languages/modes are set up on
a single workstation, identical job numbers may be displayed
when an inquiry command (lpstat) is issued.
Sample
To inquire about the print data received by a printer set up as
"P001", enter the following command:
%lpstat -o P001

-C OPTION (LPR COMMAND)

This section explains the functions which can be specified and
printing operations which will be affected by the -C option.
The -C option is available only when the SunOS directs the printer
to enter the spool mode.
Important:
• When the PostScript logical printer that was configured on
the EWS and -C option of "lpr" command have been specified
simultaneously, some of the actions cannot be guaranteed to
work. Also, when specifying the PostScript logical printer as a
default printer on Unix, it is recommended not to user the -C
option by "lpr" command.
FUNCTION
The following items can be set up by using the -C option:
B930n User's Guide> 89