Before Setting Oven Controls - Kenmore 790.7185 Series Use And Care Manual

Hide thumbs Also See for 790.7185 Series:
Table of Contents

Advertisement

Before Setting Oven Controls

Oven Vent Location
The oven vent is located below the backguard. When
the oven is on, warm air is released through this vent.
This venting is necessary for proper air circulation in the
oven and good baking results. DO NOT BLOCK THE
VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS
COOL (PRIOR TO OPERATING THE OVEN). Always use
oven mitts when using the oven.
Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up
front of rack and slide out. To replace, fit the rack onto
the guides on the oven walls. Tilt the front of the rack
upward and slide the rack back into place.
Arranging Oven Racks with 6 Rack Positions
To bake on a single rack, place the rack on position 3 or
4. To bake on 2 racks, place the racks on positions 3 and
5.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents