Setting Oven Controls - Kenmore 790.7185 Series Use And Care Manual

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash
"12:00".
1. Press .
2. Within 5 seconds, press and hold the
Note: The clock cannot be changed during any timed bake or self-clean cycle.
To Set the Minute Timer:
1. Press .
2. Press the to increase the time in one minute increments. Press and hold the
minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the
3. The display shows the timer count down in minutes until one minute remains. Then the display will count down in
seconds.
4. When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds
until is pressed.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when
the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the
minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions,
press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the
To Cancel the Minute Timer before the set time has run out: Press
Note: To turn the time of day display OFF or ON in the display press
once) and then release.
or until the correct time of day appears in the display.
first, the timer will advance to 11 hours and 59 minutes.
or
.
and hold for 15 seconds (the control will beep
10
to increase the time in 10
to increase or decrease the time.