Navigating The Menu; Setting The Control Panel Language - Oki B710dn Setup Manual

Navigating the Menu

For full details on the menu structure, refer to the
User's Guide.
Display the Menu
screen
Switch between the
menu levels
Switch between
menus or items in the
same level
To enter selected
(character) value or
to go back and
change a (character)
value
When you press the <MENU> button on the control
panel, you enter the printer's menu system. At that
point, the first line of the display contains the text
[Functions], indicating that you are in the menu
system. The second line of the display lists the active or
highlighted menu item. You can scroll through the Menu
Functions list by pressing the < > or <
Press the <Enter> button to enter the highlighted
menu item, or the <Back> button to revert back to the
previous menu level.
By using the button actions as indicated above, you can
navigate through the menu items and their respective
sub menu items list: The Upper level Menu [Functions]
list contains the following menu items: Print Jobs Menu,
Configuration, Information Menu, Menus and Admin
Setup.
> If you have a USB FLASH Drive installed in
the USB Flash Drive Connector located on
the Control Panel then [USB Drive] will
show first in the Menu Functions list on the
display.
> The layout of the [Functions] menu
structure may differ depending on the
(options) configuration and settings of the
printer.
<Enter> button
< > button (moves one level
down) or < > button (moves
one level up).
< > button (displays the
previous menu or item) or
< > button (displays the next
menu or item)
<Enter> button (moves to the
right) or <Back> button
(moves to the left)
> buttons.
NOTE
NOTE
Setting the control
panel language
English is the default language. Use the following
procedure to change the display language.
1. Press <Enter> to display the Menu screen.
2. Press < > until [Menus] is highlighted, then press
<Enter>.
3. Press < > until [Sys Config Menu] is highlighted,
then press <Enter>.
4. Press < > until [Language] is highlighted, then
press <Enter>.
5. Press < > until the desired language is
highlighted, then press <Enter>.
6. Press <OnLine> to complete the language setting.
14 / English