Setting Up Your Microwave Oven - Insignia NS-MW09RD7 User Manual

NS-MW09RD7
# Item
5 Clock
6 Number buttons
7 STOP/Cancel
8 Memory
9 Weight Defrost
10 Kitchen Timer
11 Auto menu
12 Start/+30 SEC.

Setting up your microwave oven

1 Remove the oven and all materials from the carton and oven cavity.
2 Examine the oven for any damage, such as dents or a broken door. Do
not install or use the oven if any damage is found.
3 Remove any protective film from the microwave oven cabinet surface,
the door, and the control panel.
4 Place the oven on a level surface that provides enough open space for
the intake and outlet vents.
10
Description
Press to set the clock, then press the number buttons to enter the
current time.
Press to enter cook time, defrost time, clock time, and other
information.
Press to stop the cooking process. Press again to cancel the cooking
operation.
Press this button to set up to three memorized procedures.
Press this button, then enter the weight of the item you want to
defrost. The cooking time is set automatically.
Press this button, then enter the time you want to count down.
Press one of these buttons to automatically cook the item indicated.
In standby mode, press this button to begin cooking.
While cooking, press this button to add 30 seconds to cooking time.
Note
Notes
www.insigniaproducts.com
Do not remove the light brown mica cover in the
oven cavity. This cover protects the magnetron.
• A minimum clearance of 3.0 inches (7.5 cm) is
required between the oven and any adjacent
walls. One side must be open.
• Leave a minimum clearance of 12 in. (30 cm)
above the oven.
• Do not remove the legs from the bottom of the
oven.
• Blocking the intake and/or outlet openings can
damage the oven.
• Place the oven as far away from radios and TVs as
possible. Operation of the microwave oven may
cause interference to your radio or TV reception.