Table of Contents
Advertisement
Create a Celerity FC installation floppy disk
from the Celerity FC Installation CD
Note
You must have a floppy disk with the Celerity
FC driver software to install a fresh copy of
the Windows OS onto a disk attached to a
Celerity FC adapter.
Insert the Installation CD into a CD-ROM. The
1
installation starts automatically start.
If the Celerity FC installation does not start,
navigate to the root of the CD and run
autorun.bat
2
Select Windows Drivers from the items on the
left side of the screen.
3
Select the appropriate CPU-based operating
system from operating system choices.
4
Select Create Miniport Driver Diskette or
Create StorPort Driver Diskette for the
desired operating system.
5
Follow the instructions for creating the floppy
disk.
Mac OS X driver installation, update
New or previous installation
1
Extract the latest version of the device driver file
to your desktop.
Linux driver installation, update
New or previous installation
Note
You must have kernel header files for the
appropriate kernel installed.
You must be logged in as root.
1
If updating an existing Celerity FC driver, at the
command prompt type rmmod celerityfc
21 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual
Create a floppy disk from a Celerity FC driver
download from the ATTO Technology website
1
Download the latest driver software from the
ATTO web site, www.attotech.com.
2
The download is a self-extracting executable
that expands the driver software package. Run
the self-extracting executable and select a
folder to place the expanded software package.
3
Navigate to the folder with the desired Celerity
FC driver.
Note
The expanded software package contains a
Miniport driver and may contain a StorPort
driver. The Celerity FC Windows Miniport
driver is in the base directory of the
expanded software package. The Celerity
FC Windows StorPort driver is in the
StorPort subdirectory.
4
Run makedisk.bat and follow the instructions
for creating the floppy disk.
2
Double click the installer icon and follow the on
screen prompts.
3
Reboot your system for the changes to take
effect.
2
Download the appropriate version of the device
driver from the ATTO web site.
3
At the command prompt, extract the file using
the command tar -xfz <filename.tgz>
Enter the directory created in the above step
4
and type make install to overwrite any
previously-installed driver.
5
Start the driver by typing modprobe celerityfc
Advertisement
Table of Contents
