ATTO Technology Celerity FC host adapters FC-44ES 4-Gb Installation And Operation Manual page 8

Celerity FC-41ES Adapter
The Celerity FC-41ES is a single-channel host
adapter providing support for the most demanding
application requirements. With 4-Gb FC speeds of
up to 800 MB/sec. per channel, the FC-41ES is a
cost effective connectivity solution for
environments requiring maximum throughput.
The FC-41ES also takes advantage of the latest in
host interconnect technology: PCI Express, a
serial, high-speed connection that supports
aggregate throughput up to 1 GB/sec. (x4 PCIe).
The FC-41ES is software compatible with existing
PCI and PCI-X products using the same device
drivers as other Celerity FC products, simplifying
user installation and support. It is backward
compatible with existing 2-Gb and 1-Gb Fibre
Channel infrastructure, protecting existing
technology investments.
Hardware specifications
• Single Fibre Channel port
• 4-Gigabit FC data transfer rates
• 800 MB/sec. maximum full-duplex
throughput
• Supports all FC topologies: direct fabric,
arbitrated loop and point-to-point
• ANSI Fibre Channel: FC-PH, FC-FCP, FC
FCP2, FC-AL, FC-AL2, FC-PLDA, FC-FLA
• Flash ROM for easy field upgrades
• FC Class 3 support
• Local management and diagnostics
• Buffer credits: 8 @ 512 Bytes; 8 @ 2 KB
Advanced FC capabilities
• Supports SNIA HBA API
• On-demand automatic negotiation among 4-Gb,
2-Gb and 1-Gb Fibre Channel
• Supports target and initiator modes
• Supports Windows FDMI and WMI
• Features exclusive Advanced Data Streaming
TM
(ADS ) Technology
Host bus specifications
• x4 mechanical and x4 electrical PCI Express
interconnect
• Supports PCI Express Base Spec 1.0a and CEM
Spec 1.0a
• Supports PCI Express to PCI/PCI-X bridge spec
1.0
3 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual
Environmental & physical specifications
• Conforms to PCIe low profile form factor
specifications
• Length: 5.600 inches
• Height: 2.712 inches
• Operating Temperature: 0-45ºC (32º-113ºF)
• Storage Temperature: -40º to 70ºC (-40º to
158ºF)
• Relative Humidity: 5 to 95% non-condensing
• 100 lf/m (minimum) airflow recommended
• Power: 12V@ 0.4A max; 3.3V@1.0A max.
External connectivity
• Easy-to-install full height connection bracket
• External LEDs for on-line and speed status for
each channel
• Single pluggable optical LC SFP transceiver
included
Software specifications
• Windows XP, 2000, Server 2003
• Red Hat Linux (2.4 and 2.6 kernel)
• SUSE Linux (2.6 kernel)
• Mac OS X (10.4.x or later)